Influence of Moisture Content on Critical Stress Intensity Factor of Wood
Kiyoshi Sato; Hisato Yamamoto; Atsushi Taya; Hiroyuki Okuyama
Vol. 49 No. 4 CONTENTS
Special Issue on Wood and Wood Based Materials
General Paper
Special Issue on Wood and Wood Based Materials (Vol.49 No.4)
Technical Note (Vol.49 No.4)
Influence of Moisture Content on Critical Stress Intensity Factor of Wood |
|
Kiyoshi Sato; Hisato Yamamoto; Atsushi Taya; Hiroyuki Okuyama |
365 |
Original Paper (Vol.49 No.4)
Bearing Test of Glued Laminated Timber with Drift-Pins |
|
Masaki Harada; Tomoyuki Hayashi; Masahiko Karube; Hirozumi Tsuchida; Tomohiro Zushi; Kohei Komatsu |
368 |
Influence of PEG Treatment on Fracture of Wood under Mixed Mode Loading |
|
Kiyoshi Sato; Hisato Yamamoto; Yuuji Takagi |
373 |
Effect of Growth Rate on the Growth Strain in Cryptomeria Japonica |
|
Ryushi Kitahara; Tsuyoshi Sakaida; Katsuaki Haruyama |
379 |
Effects of Outdoor Exposure on the Strength Distribution of Oriented Strand Board(OSB) and Particle Board(PB) |
|
Tomoyuki Hayashi; Atsushi Miyatake; Shuichi Kawai |
384 |
Damping Characteristic in Longitudinal Free Vibration and Bending Strength of Lumber with Knots |
|
Jun Kimura; Takuro Hirai; Naoki Kanamaru; Koji Ueda |
390 |
Shear-Through-Thickness Properties of Wood-Based Panels Determined by the Two-Rail Shear and the Edgewise Shear Methods |
|
Shigehiko Suzuki; Daisuke Nawa; Kohta Miyamoto; Tatsuya Shibusawa |
395 |
Development of AE Sensor Using PVDF Film fro Detecting Termite Attack |Application of PVDF Film Inserted between Construction Members of Wooden House| |
|
Yoshiyuki Yanase; Yoshihisa Fujii; Shogo Okumura; Tsuyoshi Yoshimura; Yuji Imamura |
401 |
Original Paper (Vol.49 No.4)
Cross Sectional Structures and Its Optimality of the Fore-Wing of Beetles |
|
Jinxiang Chen; Masaharu Iwamoto; Qing Qing Ni; Ken Kurashiki; Kenji Saito |
407 |
Carbonation of Concrete and Corrosion of Steel Bars in Existing Reinforced Concrete Structures |
|
Yukio Kitago; Toyoaki Miyagawa |
413 |
Study of Strength Evaluation of Silica-Particulate-Filled Epoxy Resins Based on Stress Singularity Theory |
|
Akihiro Yaguchi; Takeshi Terasaki; Makoto Kitano |
420 |
Fatigue Strength of PAN-Based Carbon Fiber under Cyclic Loading |
|
Noriyo Horikawa; Hideaki Nakayama; Akiyoshi Sakaida; Tsuneshichi Tanaka |
426 |
Development of Al2O3/Cu Functionally Graded Material Based on Residual Stress Analysis |
|
Masayuki Arai; Uichi Iwata; Kenji Hasegawa; Kikuo Kishimoto |
433 |
Fracture Mechanics Approach to Fatigue Crack Propagation in Vulcanized Natural Rubber |
|
Keisuke Tanaka; Yoshiaki Akiniwa; Kazuyuki Ito; Noboru Egami |
440 |
Specimen Thickness Dependence of Fatigue Crack Propagation in Polycarbonate Plates |
|
Tetsuro Shiraishi; Hiroyuki Ogiyama; Hitoshi Tsukuda |
448 |
Influence of Polymer-Cement Ratio, Water-Cement Ratio and Air Content on Flow of Fresh Polymer-Modifed Mortar and Equation for Predicting Its Flow |
|
Minoru Tokumoto |
453 |
Estimation of Strength Reliability for Ceramic/Metal Jointing Streucture-The Basic Study of the Theermal Stress and Residual Stress Behavior during Ceramic / Metal Joint Process- |
|
Nagatoshi Okabe; Xia Zhu; Kouta Hirobe; Masako Nakahashi |
461 |
Lecture (Vol.49 No.4)
Fracture Mechanics with Bonding or Contacting Interfaces X:Microscopic Damage Mechanics of Composites |
 |
Nobuo Takeda; Shinji Ogihara |
468 |
