X-Ray Study on Residual Stress and Strength of TiC Thin Films Coated by CVD Method |
 |
Keisuke TANAKA, Toshimasa ITO, Yoshiaki AKINIWA and Takahiro ISHII |
738 |
An Effect of Residual Stress on Mechanical Strength of TiN and TiCN Thin Films Having Fiber Texture due to Heat Treatment |
|
Masahide GOTOH, Toshihiko SASAKI and Yukio HIROSE |
744 |
Study on Elastic Constants and Residual Stress of Ceramic Hard Films |
|
Kenji KANEKO, Shigeru YONETANI, Manabu YASUOKA and Hiroyasu TOMODA |
750 |
In-Situ Stress Measurement of Bond Coatings at High Temperature by High-Energy Synchrotron X-Rays |
|
Kenji SUZUKI, KeisukeTANAKA, Yoshiaki AKINIWA, Masashi KAWAMURA, Kozi NISHIO and Hideki OKADO |
756 |
Evaluation of Residual Stress Distribution in Shot-Peened Steel by Synchrotron Radiation |
|
Yoshiaki AKINIWA*, Keisuke TANAKA*, Kenji SUZUKI**, Etsuya YANASE***
Koji NISHIO, Yukihiro KUSUMI, Hideki OKADO and Kazuo ARAI |
764 |
Evaluation of Phase Stresses of Al2O3/YAG Binary MGC by Synchrotron Radiation -Residual Stress States and Stress Behavior of YAG Phase- |
|
Hiroshi SUZUKI, Koichi AKITA, Yasuo YOSHIOKA, Yoshiharu WAKU and Hiroshi MISAWA |
770 |
Estimate Technique for Circumferential Distributions of Residual Stresses on Cylindrical Component Surfaces by X-Ray Stress Measurement |
|
Taizo OGURI, Kazuo MURATA and Yoshihiro SATO |
776 |
Application of MA-SPS Method for Fabrication of Microstructures Using LIGA Process |
|
Naoki MIYANO, Kazunori TAGAYA, Kazunori KAWASE, Kei AMEYAMA and Susumu SUGIYAMA |
783 |
Effect of Crystal Grain Size on Strain Localization -Observation of Surface Temperature Distribution under Deformation- |
|
Hidetoshi SAKAMOTO, Jian SHI and Eiji NAKAMACHI |
789 |
Stress Concentration Formula Useful for Any Dimensions of Notches -Effect of Notch Opening Angle on the Stress Concentration Factor- |
|
Yasushi TAKASE, Nao-Aki NODA, Yan GAO and Tomokazu TAKEMOTO |
795 |
Temperature and Stress During Induction Hardening Process of Gears by Dual Frequency Method |
|
Kouitsu MIYACHIKA, Satoshi ODA, Hajime TSUBOI and Hiroshige FUJIO |
801 |
Influence of Thermal Aging on Interface Delamination of Thermal Barrier Coatings |
|
Takamasa ONOKI, Tetsuro TONOMORI, Kazuhiro OGAWA, Toshiyuki HASHIDA, Tetsuo SHOJI, Masahide MARUYAMA, Hiroyuki TOGASHI and Taiji TORIGOE |
807 |
Fracture Criterion of Single Fiber-Composite under Thermal and Tensile Loadings Based on Energy Release Rate |
|
Tadanobu INOUE, Shojiro OCHIAI, Masaki HOJO and Kotobu NAGAI |
815 |
Fatigue Crack Propagation in Magnesium Alloy AZ31 Rolled Plate |
|
Keiro TOKAJI, Mitsutoshi KAMAKURA, Norihiko HASEGAWA and Yasuki TSUBOI |
821 |
Fatigue Bevavior of Wood-Based Panels for Structural Use under Shear-Loading through Thickness |
|
Yasutoshi SASAKI, Katsuyuki ANDO, Mariko YAMASAKI, Takayuki ITO and Shigehiko SUZUKI |
827 |
Effect of Strain Waveform on Low-Cycle Fatigue Life of Ti-6Al-4V Alloy at Elevated Temperature |
|
Seiichi NISHINO, Kazuaki SHIOZAWA and Tomonori OHKUMA |
833 |
High Temperature Strength of Structure-Controlled Ni-Al-Mo In-Situ Composites |
|
Hitoshi TAKAGI, Koji TAKAHASHI and Sumio FUJIMURA |
838 |
Grain Boundary Strengthening Mechanism of Tungsten Containing 9 to 12% Chromium Ferritic Heat Resistant Steels at 650Ž |
|
Yasushi HASEGAWA, Masahiro OHGAMI and Taro MURAKI |
843 |
High-Pressure Phase Diagram of Mg-Al Alloys and Variation of Mechanical Properties in Solid Solutioning and Aging Process |
|
Akihito MATSUMURO, Futoshi MAEKAWA, Masaya MITSUDA, Iwao KONDO and Yutaka TAKAHASHI |
851 |
Development of High-Strength Cross-Ply "Green" Composites |
|
Shinji OCHI, Hitoshi TAKAGI and Hideyuki TANAKA |
857 |
Sintering for Grinding Swarf of Bearing Steel by Pulsed Electric Current Sintering |
|
Hitoshi TAKAGI, Sumio FUJIMURA, Akihiro ITO, Tetsuya YAMANO, Hisakazu TOMINO, Yoshihito KONDO and Kazutoshi YAMAMOTO |
863 |
Changes of Color and Psychological Images of Wood Used for Exterior |
|
Yoshihiro SUGIE and Minoru MASUDA |
867 |
