In-Situ Synchrotron Measurement of Thermal Stress in Textured Copper Thin Films during Thermal Cycling |
 |
Keisuke TANAKA, Toshimasa ITO, Yoshiaki AKINIWA and Hiroyuki OHTA |
728 |
Oxidization of Thermal Barrier Coatings and Spalling Stress Analyzed with X-Rays |
|
Kenji SUZUKI, Takahiro KUBO, Keisuke TANAKA, Yoshiaki AKINIWA and Hideki OKADO |
734 |
Effects of Residual Stress on Critical Strain for Macroscopic Crack Formation on Thermal Spray Coatings |
|
Koichi AKITA and Shogo TOBE |
740 |
Residual Stress in Uni-Directionally Deformed Surface Layer by Shotpeening on Spring Steel |
|
Takayuki SAKAKIBARA and Yoshihiro SATO |
746 |
Measurement of Stress Distribution Near Notch and Fatigue Crack in Ultra-Fine Grained Steel by Synchrotron Radiation |
|
Yoshiaki AKINIWA, Hidehiko KIMURA and Keisuke TANAKA |
752 |
Study on Correlation between Minimum Irradiation Area and Microstructure in Micro X-Ray Stress Measurement |
|
Yoshihisa SAKAIDA |
758 |
Microstructure and Mecanical Properties of MM/SPS Processed TiC Dispersed SUS316L Compacts |
|
Susumu MATSUNO, Masashi TAKAMI and Kei AMEYAMA |
765 |
A Neutron Diffraction Study on Work-Hardening Mechanism for a Pearlite Steel |
|
Atsuomi KANIE, Yo TOMOTA, Tetsuya SUZUKI, Shuki TORII, Atsushi MORIAI, Nobuaki MINAKAWA, Yukio MORII and Takashi KAMIYAMA |
772 |
Compression Molding and Mechanical Properties of Green-Composite Based on Ramie/PLA Non-Twisted Commingled Yarn |
|
Teruo KIMURA, Masahiro KURATA, Tatsuki MATSUO, Hirokazu MATSUBARA and Tadayuki SAKOBE |
776 |
Effect of Crack Position on Slant Crack Growth in Fretting Fatigue |
|
Toru KIMURA and Kenkichi SATO |
782 |
Residual Stress and Microstructural Damage of Polycrystalline Copper Thin Films after Thermal Cycling |
|
|
788 |
Creep-Fatigue Life Prediction for Permanent Magnet Type Eddy Current Retarder |
|
Yasutaka NOGUCHI, Mitsuo MIYAHARA, Kenji IMANISHI, Akira SAITOH and Nobutaka KISHINE |
795 |
Estimation of Creep Constitutive Law for Cr-Mo-V Material in Turbine Rotor Using Indentation Creep Test |
|
Shinsuke SAKAI, Satoshi IZUMI, Takashi MURAKAMI, Akito NITTA, Junichi KUSUMOTO and Yu WATANABE |
801 |
Tension Test Method and Thermal Degrandation of Fatigue Strength for Unidirectional CFRP Ring |
|
Tomohiro NARUSE, Toshio HATTORI, Haruo MIURA and Kazuki TAKAHASHI |
806 |
Influence of Total Sputtering Pressure and Work Voltage on the Optical and Electric Propeties of ITO Film onto Unheated Polymeric Substrate Produced by the Inclination Opposite Target Type DC Magnetron Sputtering |
|
Dohoon SHIN, Ri-ichi MURAKAMI, Daisuke YONEKURA and Yunhae KIM |
812 |
Effect of Preparation Condition on Pore Structure and Heavy Oil Sorption of Charcoals |
|
Norio IWASHITA, Yoko NISHI, Yoshihiro SAWADA and Michio INAGAKI |
818 |
