Vol. 54 No. 12 CONTENTS
Special Issue on
Fatigue of materials
General Paper

Special Issue on Fatigue of materials (Vol.54 No.12)

Foreword

T.Hoshide

1205

Original Paper (Vol.54 No.12)

Evaluation for Gigacycle Fatigue Strength of Alloy Tool Steel

Nobuyuki MIYAMOTO, Hiromitsu ASAI, Susumu MIYAKAWA, Yoshiaki AKINIWA and Keisuke TANAKA

1206

The Study of ODA's Formative Condition by Fatigue Test in Vacuum of High Strenght Steel

Hiroki KAWANO, Yoshihito KUROSHIMA and Shoji HARADA

1213

Effect of Hydrogen Charge on Fatigue Properties of Martensitic Stainless Steel

Junji NAGATA, Nicolas GUY and Yukitaka MURAKAMI

1217

Effects of Hydrogen Charge on Cyclic Stress-Strain Properties and Fatigue Behavior of Carbon Steels

Hideyuki UYAMA, Yoji MINE, Yukitaka MURAKAMI, Masaru NAKASHIMA and Kazunori MORISHIGE

1225

Efect of Hydrogen Gas Environment on Fretting Fatigue

Masanobu KUBOTA, Naoki NOYAMA, Munehiro FUETA, Chu SAKAE and Yoshiyuki KONDO

1231

Effects of Crack Size, Stress Ratio and Hydogen on the Near Threshold Fatigue Crack Propagation of High Strength Steel

Kazutoshi YANAGIHARA, Satoshi OHYANAGI,Masanobu KUBOTA, Chu SAKAE and Yoshiyuki KONDO

1237

Fatigue Behaviour of Cast Irons with Spheroidal Carbides Dispersed within Fully Martensitic and Martensitic/Bainitic Matrix Microstructures

Keiro TOKAJI, Takao HORIE and Yasuhiko TAKAHASHI

1244

Effects of Notch and Surface Roughness on Long Life Fatigue Behaviour in High Strength Steels

Hisatake ITOGA, Keiro TOKAJI, Masaki NAKAJIMA and Haeng-NAM Ko

1249

Influence of Shot Peening Treatment on High-Cycle Fatigue Properties of Degassing Processed AC4CH Aluminum Alloy

Kiyotaka MASAKI , Youhei KUMAGAI , Yasuo OCHI, Takashi MATSUMURA and Tatsuhiko HAMAGUCHI

1255

Evaluation of Fatigue Crack Properties on Austenitic Stainless Steel with Artificial Corrosion Pits

Kiyotaka MASAKI, Yasuo OCHI and Takashi MATSUMURA

1262

A Study on the Mechanism of Small Fatigue Crack Deflection Behavior in ƒ¿-Brass by Means of In-stu Atomic Force Microscopy and Crystallographic Orientation Analysis

Atsushi SUGETA, Yoshihiko UEMATSU, Ei-ichi KUMONAGA and Masahiro JONO

1268

Investigation of Fatigue Strength Evaluation Method in Biaxial Stress State

Takanori KATO, Miyuki YAMAMOTO and Yoshinari YAMAMURA

1275

Prediction of Fatigue Crack Propagation Path under Combined Torsional and Axial Loading

Keisuke TANAKA,Hiroki TAKAHASHI,Takuya KATO and Yoshiaki AKINIWA

1281

Crack Propagation Behavior in Pure Aluminum -Observation and Evaluation of Crack Propagation by Mixed Mode-

Chobin MAKABE,Takuya YAMANE,Toshiyasu SUEYOSHI and Tatsujiro MIYAZAKI

1288


General Paper (Vol.54 No.12)

Original Paper (Vol.54 No.12)

Mode ‡U Fatigue Crack Growth Characteristics and Experimental Evaluation of the Crack Driving Force

Hideo NISHIZAWA and Takeshi OGAWA

1295

Strain Rate Dependence of Dynamic Flow Stress of Aluminum Alloy 6061 at Very High Straom Rates

Kiyotaka SAKINO

1301

X-Ray Residual Stress Measurement of Cylindrical Surface at Narrow Part by Pseudo-ƒÕ Angle Changing Method -Residual Stress in the Tooth Depth Direction at Tooth Root of Rack-

Taizo OGURI, Kazuo MURATA and Katsumi YAMAGUCHI

1307

Lecture (Vol.54 No.12)

Properties of Polymer Concrete and the Structural Use‡W:Performance Based Design of Polymer Concrete Structures and the Future

Minoru KUNIEDA, Atsushi HATTORI and Kimitaka UJI

1314