Contents45-1

Vol. 45 No. 1 CONTENTS
Special Issue on Fatigue
General Paper

Foreword
K. Shiozawa	1

Technical Note (Vol.45 No.1)

Overview of the recent airplane's accidents related to the fatigue cracks and revised (draft) fatigue standards of FAA

Genkichi Fujiwara
2

Original Paper (Vol.45 No.1)

Influences of non-metallic inclusion and carbide on high-cycle fatigue strength of tool steels

Takayuki Abe; Kenji Kanazawa
9

Effects of artificial small defect and graphite on torsional fatigue strength of ductile cast iron

Masahiro Endo
16

Low-cycle fatigue behavior of notched low-carbon steel components

Akihiro Morimoto; Atsushi Saito; Eiichi Matsumoto; Jun Matsushima
21

Corrosion fatigue behavior of chromium nitride coated steel

Kazuaki Shiozawa; Kou Motobayashi; Masaru Sonobe
26

Fatigue behavior of stainless steel coated with plasma-sprayed ceramics in physiological saline solution

Tadaaki Satake; Mikio Sugano; Jun Kisimoto; Hirotaka Masaki
32

Effect of thermal history on tensile and fatigue crack growth properties of a cryogenic austenitic stainless steel forged at room and liquid helium temperatures

Konosu Shinji; Kishiro Tomohiro; Ivano Ogi; Nunoya Yoshihiko; Nakajima Hideo; Tsuji Hiroshi
38

Effect of shot peening on fatigue strength of Ti-6Al-4V alloy at elevated temperatures

Yozo Kato; Shinzaburo Takafuji; Masaki Kiriyama
43

Observation of rolling contact fatigue damage of polycarbonate specimen

Chobin Makabe; Takeshi Suzuki; Hideo Yara; Tateki Yafuso
48

Correlation between microstructure and fatigue behavior of silicon nitride ceramics

Hiroshi Hohjo; Akira Yamada; Katsushi Saruki; Nobuo Kamiya
55

Torsional fatigue of SiC whisker or SiC particulate reinforced 6061 aluminum alloys

Hitoshi Ishii; Atsushi Yano; Keiichiro Tohgo
60

Fatigue crack growth behavior of alumina short fiber reinforced aluminum alloy at room and higher temperatures

Tsuneshichi Tanaka; Hideaki Nakayama; Shigeru Yamamoto; Yukiyoshi Kobayashi
64

Effects of short fiber reinforcement and mean stress on tensile fatigue strength characteristics of polyethersulfone

Harumi Furue; Katsunobu Nonaka
72

Development of fatigue crack monitoring system

Kengo Morino; Chiaki Hiwa; Yasushi Ikai
79

Sizing of fatigue crack on free surface by use of bottom reflected tip echo

Kasaburo Harumi; Masanori Uchida; Junnichi Ooshima; Yasuhiro Aikawa
85

General Paper (Vol.45 No.1)

Original Paper (Vol.45 No.1)

In-situ synthesis of Cu-based composites by combustion reaction using Cu-Zr-BN powder mixtures

Hiroshi Tsuda; Hiroshi Mabuchi; Yutaka Nakayama
89

Effects of cement composition and silica content on microstructure and compressive strength of autoclaved mortar

Toshiyuki Takahashi; Hiroyuki Nishitomi; Seishi Goto
94

Characteristics of bleeding, freeze-thaw resistance and watertightness of concrete with ferro-nickel slag fine aggregates

Kazuo Togawa; Masami Shoya; Katsuro Kokubu
101

Physical meaning of creep damage parameters evaluated from distribution of grain boundary cavities on cross-section

Naoya Tada; Takayuki Kitamura; Ryuichi Ohtani
110

Thermal stress and strength reliability of heater for cathode ray tube

Toshiaki Arato; Hideki Shinohara; Hiroshi Miyata; Nobuyuki Koganezawa; Yasuhiko Nonaka
118

Development of simple thermal fatigue test method using low-thermal expansion restraining holders

Hajime Ikuno; Shogo Iwanaga;Yoji Awano
125

Measurement of stress intensity factor under mixed-mode loading by the method of caustics

Yukio Hirose; Masayuki Shozu ; Yuichi Kawagishi; Toshihiko Sasaki; Ken-ichi Hirashima
131

Lecture (Vol.45 No.1)

Computer simulation on fracture of engineering materials at high temperature
III : Totral and/or remaining life assessment of structural material

Kazunari Fujiyama
137

Overview of the recent airplane's accidents related to the fatigue cracks and revised (draft) fatigue standards of FAA
Genkichi Fujiwara	2

Influences of non-metallic inclusion and carbide on high-cycle fatigue strength of tool steels
Takayuki Abe; Kenji Kanazawa	9
Effects of artificial small defect and graphite on torsional fatigue strength of ductile cast iron
Masahiro Endo	16
Low-cycle fatigue behavior of notched low-carbon steel components
Akihiro Morimoto; Atsushi Saito; Eiichi Matsumoto; Jun Matsushima	21
Corrosion fatigue behavior of chromium nitride coated steel
Kazuaki Shiozawa; Kou Motobayashi; Masaru Sonobe	26
Fatigue behavior of stainless steel coated with plasma-sprayed ceramics in physiological saline solution
Tadaaki Satake; Mikio Sugano; Jun Kisimoto; Hirotaka Masaki	32
Effect of thermal history on tensile and fatigue crack growth properties of a cryogenic austenitic stainless steel forged at room and liquid helium temperatures
Konosu Shinji; Kishiro Tomohiro; Ivano Ogi; Nunoya Yoshihiko; Nakajima Hideo; Tsuji Hiroshi	38
Effect of shot peening on fatigue strength of Ti-6Al-4V alloy at elevated temperatures
Yozo Kato; Shinzaburo Takafuji; Masaki Kiriyama	43
Observation of rolling contact fatigue damage of polycarbonate specimen
Chobin Makabe; Takeshi Suzuki; Hideo Yara; Tateki Yafuso	48
Correlation between microstructure and fatigue behavior of silicon nitride ceramics
Hiroshi Hohjo; Akira Yamada; Katsushi Saruki; Nobuo Kamiya	55
Torsional fatigue of SiC whisker or SiC particulate reinforced 6061 aluminum alloys
Hitoshi Ishii; Atsushi Yano; Keiichiro Tohgo	60
Fatigue crack growth behavior of alumina short fiber reinforced aluminum alloy at room and higher temperatures
Tsuneshichi Tanaka; Hideaki Nakayama; Shigeru Yamamoto; Yukiyoshi Kobayashi	64
Effects of short fiber reinforcement and mean stress on tensile fatigue strength characteristics of polyethersulfone
Harumi Furue; Katsunobu Nonaka	72
Development of fatigue crack monitoring system
Kengo Morino; Chiaki Hiwa; Yasushi Ikai	79
Sizing of fatigue crack on free surface by use of bottom reflected tip echo
Kasaburo Harumi; Masanori Uchida; Junnichi Ooshima; Yasuhiro Aikawa	85

In-situ synthesis of Cu-based composites by combustion reaction using Cu-Zr-BN powder mixtures
Hiroshi Tsuda; Hiroshi Mabuchi; Yutaka Nakayama	89
Effects of cement composition and silica content on microstructure and compressive strength of autoclaved mortar
Toshiyuki Takahashi; Hiroyuki Nishitomi; Seishi Goto	94
Characteristics of bleeding, freeze-thaw resistance and watertightness of concrete with ferro-nickel slag fine aggregates
Kazuo Togawa; Masami Shoya; Katsuro Kokubu	101
Physical meaning of creep damage parameters evaluated from distribution of grain boundary cavities on cross-section
Naoya Tada; Takayuki Kitamura; Ryuichi Ohtani	110
Thermal stress and strength reliability of heater for cathode ray tube
Toshiaki Arato; Hideki Shinohara; Hiroshi Miyata; Nobuyuki Koganezawa; Yasuhiko Nonaka	118
Development of simple thermal fatigue test method using low-thermal expansion restraining holders
Hajime Ikuno; Shogo Iwanaga;Yoji Awano	125
Measurement of stress intensity factor under mixed-mode loading by the method of caustics
Yukio Hirose; Masayuki Shozu ; Yuichi Kawagishi; Toshihiko Sasaki; Ken-ichi Hirashima	131

Computer simulation on fracture of engineering materials at high temperature III : Totral and/or remaining life assessment of structural material
Kazunari Fujiyama	137