Vol. 45 No. 5 CONTENTS
Special Issue on Polymer Matrix Composites
General Paper

Special Issue on Polymer Matrix Composites (Vol.45 No.5)

Foreword

Masaru Zako

 477

Original Paper (Vol.45 No.5)

Effect of temperature on nonlinear tensile stress-strain behavior of CF/epoxy composites

Keiji Ogi; Nobuo Takeda; Satoshi Kobayashi; Dong-Yeul Song

 478

Estimation of mode I interlaminar fracture toughness of CFRP laminates by using wedge insert fracture test

Takayuki Kusaka; Tomoaki Kurokawa

 484

Effects of matrix resin and fiber content on behavior of fatigue crack propagation in continuous-fiber-mat reinforced CP-resin composites

Masaharu Iwamoto; Ken Kurashiki; Shigetoshi Araki

 490

Time and temperature dependence of the tensile strength of conical shaped FRP joints using polymeric adhesives

Masayuki Nakada; Tsutomu Miya; Shigeo Matsumoto; Yasushi Miyano; Kenzo Kadotani

 496

Fatigue life prediction of CFRP using evolution of creep property

Yasushi Kanagawa; Toshihiko Fujii; Akihiro Sato

 502

Estimating method for creep property of carbon fiber reinforced polyamide by enhancing stepwise temperature

Harumi Furue

 507

Influence of water on energy absorption of filament winding ring under lateral impact loading

Tsutao Katayama; Masahiro Shinohara; Tatsuya Osafune

 511

Evaluation of interface in composites with short-fiber based on viscoelastic properties

Chiaki Hiwa; Takashi Nishino; Hisashi Yamanaka; Yasushi Ikai

 517

Study on drilled hole quality in small diameter drilling of GFRP

Eiichi Aoyama; Toshiki Hirogaki; Hisahiro Inoue; Munehisa Gunjima; Hiromichi Nobe; Youji Kitahara; Tsutao Katayama

 522


General Paper (Vol.45 No.5)

Review paper (Vol.45 No.5)

Ploycrystalline Shape Memory under Multi-Axial Loading Conditions

Masataka Tokuda; Petro Sittner

 527

Original Paper (Vol.45 No.5)

On tensile properties and SCC resistance of two Al-Zn-Mg-Cu system alloys having fully recrystallized fine-grained and un-recrystallized sub-grained structures

Matsuoka Hideaki; Hirose Yukio; Kishi Yoichi; Higashi Kenji

 537

Evaluation of specimen geometry effect on brittle fracture resistance based on the local approach

Minami Fumiyoshi; Ruggieri Claudio; Ohata Mitsuru; Toyoda Masao

 544

Cyclic constitutive relation in nonproportional plastic-creep loading

Nozaki Mineo; Sakane Masao; Ohnami Masateru

 552

Development of multiaxial creep testing machine using cruciform specimen

Mukai Shoichi; Takada Toshiyuki; Sakane Masao; Ohnami Masateru; Tsurui Takafumi

 559

Anisotropic shear modulus of wood-based composite

Dong Yuku; Nakao Tetsuya; Tanaka Chiaki; Takahashi Akira; Nishino Yoshihiko

 566

High current density electrodeposition of Ni-P alloy film on alumina plate

Kiyokawa Hajime; Sawada Hiroshi; Yonezawa Susumu; Horita Kiyoshi; Unishi Terunobu; Takashima Masayuki

 572

Improvement in hole quality at laser drilling of GFRP

Aoyama Eiichi; Hirogaki Toshiki; Inoue Hisahiro; Nobe Hiromichi; Gunjima Munehisa; Kitahara Youji; Katayama Tsutao

 577

Lecture (Vol.45 No.5)

Developments of new technology in Rock mechanics - from micro to macro -
IV : Generation of fault/fracture zoness and their characteristics behaviors

Watanabe Kunihiko

 582