Microstructure and properties of Si-Ti-C-O fiber-bonded ceramics |
 |
Toshihiro Ishikawa; Shinji Kajii; Kenji Matsunaga; Toshihiko Hogami; Yasuhiko Kohtoku |
593 |
Effect of SiC addition to the mechanical properties of Al2O3/TiC/Ni symmetric functionally graded materials |
|
Kimiaki Tanihata; Zhensi Li; Yoshinari Miyamoto |
599 |
Chemical stability of Ca or Sr doped lanthanum chromites under high temperature reduced atmosphere |
|
Hua Bing Zhou; Hiroaki Taira; Hiroshi Takagi; Kunisaburo Tomono |
604 |
Effect of oxidation on fracture mechanical properties of isotropic graphite |
|
Tadahiro Nishikawa; Sawao Honda; Wataru Nitta; Manabu Takatsu |
609 |
Thermal shock resistance of b' -Sialon-BN composites prepared by pressureless sintering and reaction bonding |
|
Seiji Hayama; Masakuni Ozawa; Suguru Suzuki; Geoge Sy Chua; Kunji Yamamoto |
614 |
Preparation and dielectric properties of anisotropic BaTiO3 ceramics using doctor Blade method |
|
Takashi Hayashi; Norihiko Shimura; Isamu Hironaga |
620 |
Thermally stimulated luminescence in X-ray irradiated oxide glasses doped with Ce(III) |
|
Katsuhisa Tanaka; Kazuyuki Hirao; Hideaki Tanaka; Naohiro Soga |
624 |
Color change of glass and glass-ceramics in Bi2O3-CdO- Al2O3 system |
|
Danping Chen; Yoshinari Miura; Tokuro Nanba; Yasuaki Murata; Akiyoshi Osaka |
630 |
Change in preferential orientation of a phase transforming from b' Cu-Zn alloys with zinc concentration |
|
Susumu Ikeno; Osamu Kume; Hitoshi Yoshimoto; Hiroshi Anada; Kenji Matsuda; Yasuhiro Uetani |
637 |
Simulation of quenching-tempering process based on metallo-thermo-mechanics |
|
Dong-Ying Ju; Masato Sahashi; Takahiro Omori; Tatsuo Inoue |
643 |
Tensile deformation behaviour of rubber composite plate |
|
Takeji Abe; Masahiko Hashizume; Kunihiko Takesue; Mamoru Ochi; Ichiro Shimizu; Shigeru Nagaki |
650 |
Improvement of fracture toughness of aluminum-lithium alloy 8090 plate by double aging |
|
Shuhei Ohsaki; Kazunori Kobayashi; Kazuhiko Yoshino; Makio Iino; Toshimasa Sakamoto |
656 |
Fracture toughness and SCC behavior of 7075 aluminum alloy under mixed-mode I-II loading |
|
Shuhei Ohsaki; Masaki Utsue; Hisashi Yokofujita; Makio Iino |
661 |
Experimental investigation for modeling of elastic-plastic-damage materials - investigation of damage surface under multiaxial loading |
|
Kunio Kamiya; Sumio Murakami |
667 |
Growth behavior and crack distribution characteristics of small surface cracks of age-hardened Al-alloy 2017-T4 |
|
Masahiro Goto; Norio Kawagoishi |
675 |
Cracking process and delamination strength of WC film coated by high-speed flame spraying |
|
Keijiro Nakasa; Masahiko Kato; Fumiaki Egawa; Masanobu Kamata; Nobuhiko Hara |
680 |
Mechanical properties of wood-mineral composites using the water glass-boron compound system |
|
Takeshi Furuno; Shigeo Aono; Tohru Uehara |
687 |
Oxidation behavior of Si3N4 at low oxygen partial pressures |
|
Hayato Nanri; Shingo Ishida; Nobuyuki Takeuchi; Koji Watanabe; Mitsuru Wakamatsu |
694 |
Service temperature estimation for gas turbine buckets based on microstructure change |
|
Yomei Yoshioka; Nagatoshi Okabe; Daizo Saito; Kazunari Fujiyama; Takanari Okamura |
699 |
