Texture development of f.c.c. polycrystal during plane strain compression |
 |
Haruyuki Konishi; Hiroshi Kitagawa; Akihiro Nakatani; Shigenobu Yasunaga |
880 |
Microscopic plastic deformation behavior on free surface of copper during plane strain compression |
|
Takayoshi Nosho; Ichiro Shimizu; Takeji Abe; Masahiro Wakayama; Kenjiro Tsutsumi |
887 |
Measurement of local strain induced martensitic phase transformation by micro hardness |
|
Yoji Shibutani; Akinori Taniyama; Yoshihiro Tomita; Taiji Adachi |
893 |
Analysis of uniaxial behavior of an Fe based shape memory alloy under cyclic thermomechanical loading |
|
Fumihito Nishimura; Noriko Watanabe; Kikuaki Tanaka |
900 |
Thermal ratchetting analysis of cylinders subjected to axial travelling of temperature distribution
- Comparison with experiments of 316FR steel cylinders - |
|
Mineo Kobayashi; Nobutada Ohno; Toshihide Igari |
906 |
Roll compression bending of chromium plate |
|
Fusahito Yoshida; Tatsuo Okada; Toshiaki Sato; Yasunori Harada; Masanobu Ohmori |
914 |
Development of dissimilar metal transition joint by hot bond rolling |
|
Hiroyuki Kurokawa; Kazuyuki Nakasuji; Haruhiko Kajimura; Takayuki Nagai; Seiichiro Takeda |
919 |
Reaction diffusion analysis for interface between Ni based super alloy and MCrAlY coating |
|
Yoshiyasu Itoh; Masataka Tamura; Yasuo Takahashi |
927 |
Residual stress and various characteristics of Ti N films coated by ion beam mixing technique |
|
Yasuhiro Miki; Hiroji Araki; Tadashi Taniguchi; Yuji Nishibata; Masao Yakushiji |
933 |
Characteristics of thermal cycle damage of FGM thermal barrier coatings in vacuum |
|
Motofumi Ohki; Yoshiharu Mutoh; Takashi Higashiwada; Shigeru Adachi; Masashi Takahashi |
939 |
Processing of metal matrix composite by centrifugal casting technique and evaluation of the elastic properties |
|
Mamoru Mizuno; Ken-ichiro Abe; Tatsuo Inoue |
946 |
Fractographic study of crack growth near ceramic/metal interface |
|
Yoshio Arai; Eiichiro Tsuchida; Junji Miyagaki; Motoki Yoshino; Mark J Meisner |
952 |
Effect of temperature on fatigue fracture mechanism of amorphous polymers of AS and PC with small content of short glass fibers |
|
Nobuji Koyama; Masayoshi Kitagawa |
957 |
High temperature fracture and creep fatigue characteristics for structural design of silicon nitride |
|
Masato Murata; Wataru Takahara; ichi Sato; Takeshi Deguchi |
963 |
Multiaxial creep fatigue of 63Sn 37Pb solder at elevated temperature |
|
Takaei Yamamoto; Masao Sakane; Masateru Ohnami; Yutaka Tsukada; Hideo Nishimura |
969 |
Numerical analysis for the energy release rate of crack in anisotropic body under combined loadings |
|
Hashimoto-Ken-ichi; Suzuki-Youichi; Yatomi-Chikayoshi |
976 |
Damage model for FRP laminates with matrix microcracks and delamination |
|
Bai QS; Murakami Sumio; Kanagawa Yasushi; Tanaka Kohhei |
981 |
Surface crack configuration detection system by DC potential drop method |
|
Hayashi-Makoto; Ohtaka-Masahiro; Naruse-Akisuke |
989 |
