Contents47-3

Vol. 47 No. 3 CONTENTS

Technical Topics (Vol.47 No.3)

Diamond thin films
- New way to hard electronics by diamond semiconductors -

Tesuro Maki; Takeshi Kobayashi
221

Original Paper (Vol.47 No.3)

Study on solidification and stabilization of coal ash by steam treatment

Yasunori Shibata
227

Modeling of void development in spall fracture analysis by damage mechanics

Tsutomu Umeda; Sumio Murakami; Masaharu Itoh
233

Impact elastic and plastic bending of beam with open-cross section

Ichiro Maekawa; Kazufumi Uda
240

Inconsistency in analytical structure proposed by Rudnicki and Rice for localization in soil material

Hitoshi Moritoki; Eiki Okuyama
247

High temperature strength property evaluation of heat affected zone in boiler weldment parts of 2.5Cr-1Mo steel

Takashi Ogata; Masatugu Yaguchi
253

Effect of corrosive environment on fretting fatigue strength of stainless steel
- In case of setting with alumina ceramics or austenitic stainless steel contact pads -

Yoshiki Gotoh
260

Influence of stress wave form on fatigue strength of single crystal nickel base superalloy

Koji Kakehi
266

Effect of microstructure on fatigue crack growth behavior in Ti-6Al-4V alloy

Atsushi Sugeta; Masahiro Jono; Yoshihiko Uematsu; Masahiro Yamamoto; Hiroaki Ueda
273

Effect of prestrain of fatigue crack initiation and propagation in SiC_p/Al2024 composites

Yoshiaki Akiniwa; Keisuke Tanaka; Kenichi Shimizu; Takaaki Hagiwara
279

Transverse shear properties of CFRP laminates under static loading

Goichi Ben; Yasuhiro Tanimoto; Miho Hashimoto
287

Stress transfer in high performance polyethylene fiber reinforced epoxy resin composite analyzed by X-ray diffraction
- In the direction perpendicular to the fiber axis -

Takashi Nishino; Tsuneo Tanaka; Katsuhiko Nakamae
293

Measurement of stress intensity factor for orthotropic CFRP laminate material by caustics method

Yukio Hirose; Yuichi Kawagishi; Mitsuru Okamoto; Masayuki Shozu
299

Analysis of AE signals by wavelet transform

Qing Qing Ni; Yasuharu Misada
305

Suitable sample area and number of division in estimation of maximum crack length by extreme value analysis
- Evaluation of estimation accuracy for the case when crack lengths follow a Weibull distribution -

Takashi Matsumura; Masahiro Ichikawa
312

Lecture (Vol.47 No.3)

Micromaterials IV : Microtribology

Reizo Kanako
319

Diamond thin films - New way to hard electronics by diamond semiconductors -
Tesuro Maki; Takeshi Kobayashi	221

Study on solidification and stabilization of coal ash by steam treatment
Yasunori Shibata	227
Modeling of void development in spall fracture analysis by damage mechanics
Tsutomu Umeda; Sumio Murakami; Masaharu Itoh	233
Impact elastic and plastic bending of beam with open-cross section
Ichiro Maekawa; Kazufumi Uda	240
Inconsistency in analytical structure proposed by Rudnicki and Rice for localization in soil material
Hitoshi Moritoki; Eiki Okuyama	247
High temperature strength property evaluation of heat affected zone in boiler weldment parts of 2.5Cr-1Mo steel
Takashi Ogata; Masatugu Yaguchi	253
Effect of corrosive environment on fretting fatigue strength of stainless steel - In case of setting with alumina ceramics or austenitic stainless steel contact pads -
Yoshiki Gotoh	260
Influence of stress wave form on fatigue strength of single crystal nickel base superalloy
Koji Kakehi	266
Effect of microstructure on fatigue crack growth behavior in Ti-6Al-4V alloy
Atsushi Sugeta; Masahiro Jono; Yoshihiko Uematsu; Masahiro Yamamoto; Hiroaki Ueda	273
Effect of prestrain of fatigue crack initiation and propagation in SiC_p/Al2024 composites
Yoshiaki Akiniwa; Keisuke Tanaka; Kenichi Shimizu; Takaaki Hagiwara	279
Transverse shear properties of CFRP laminates under static loading
Goichi Ben; Yasuhiro Tanimoto; Miho Hashimoto	287
Stress transfer in high performance polyethylene fiber reinforced epoxy resin composite analyzed by X-ray diffraction - In the direction perpendicular to the fiber axis -
Takashi Nishino; Tsuneo Tanaka; Katsuhiko Nakamae	293
Measurement of stress intensity factor for orthotropic CFRP laminate material by caustics method
Yukio Hirose; Yuichi Kawagishi; Mitsuru Okamoto; Masayuki Shozu	299
Analysis of AE signals by wavelet transform
Qing Qing Ni; Yasuharu Misada	305
Suitable sample area and number of division in estimation of maximum crack length by extreme value analysis - Evaluation of estimation accuracy for the case when crack lengths follow a Weibull distribution -
Takashi Matsumura; Masahiro Ichikawa	312