Several problems concerning the reliability of structural wood production in Japan
Hayashi Tonoyuki
Vol. 47 No. 4 CONTENTS
Special Issue on Wood and Wood Based Materials
General Paper
Special Issue on Wood and Wood Based Materials (Vol.47 No.4)
Review paper (Vol.47 No.4)
Several problems concerning the reliability of structural wood production in Japan |
|
Hayashi Tonoyuki |
331 |
Technical Note (Vol.47 No.4)
Effects of moisture content on bending properties and creep behavior of phenolic-resin-treated particleboards |
 |
Kajita Hiromu; Yano Hiroyuki |
339 |
Original Paper (Vol.47 No.4)
Properties of board made from wood powder with phenol formaldehyde powder resin |
|
Suzuki Shigehiko; Yamada Masaaki |
344 |
Manufacturing condition and mechanical properties of cylindrical LVL manufactured by spiral-winding method |
|
Yamauchi Hidefumi; Miura Izumi; Sasaki Takanobu; Koizumi Akio; Kawai Shuichi; Sasaki Hikaru |
350 |
Relationship between critical stress intensity factor KIC and crack size induced by nailing for different typical wood species of timber construction |
|
Tokuda Michio |
356 |
Wood quality of Sugi (Cryptomeria japonica D. Don) by smoke heating with increased far-infrared radiation |
|
Ishiguri Futoshi; Andoh Minoru; Yokota Shinso; Yoshizawa Nobuo |
361 |
Changes of moisture gradient in radial direction and strain during drying of lumber pierced along fiber direction |
|
Norihiko Yamada; Yoshiaki Taniguchi |
368 |
Bending creep during moisture adsorption of wood subjected to set in bending |
|
Morihiko Tokumoto; Hideki Nagae; Takashi Takeda; Tatuo Nakano |
374 |
Technical Topics (Vol.47 No.4)
Material testing and surface modification by using cavitaiting jet |
|
Hitoshi Soyama |
381 |
Binding property of r-alumina fora-alumina slurry |
|
Tomoaki Ishikuro; Akio Suzumura; Hirotaka Ogawa |
388 |
Impact elastic and plastic bending of beam with open cross section |
|
Ichiro Maekawa; Kazufumi Uda |
394 |
Influence of interface debonding on ultrasonic phase velocity and attenuation in a fiber-reinforced composite |
|
Shiro Biwa; Toshinobu Shibata |
399 |
Fracture mechanism in randomly oriented discontinuous carbon fiber reinforced borosilicate glass matrix composites |
|
Nobuo Takeda; Keiji Ogi; Prashant G Karandikar; Karl M Prewo |
406 |
Evaluation of delamination strength of thermally sprayed coating by edge-indentation method |
|
Keijiro Nakasa; Masahiko Kato; Dongkun Zhang; Keiichiro Tasaka |
413 |
Development of residual stress measurement apparatus by neutron diffraction and its application to bent carbon steel |
|
Makoto Hayashi; Shinobu Ohkido; Nobuaki Minakawa; Yukio Morii |
420 |
Micromaterials V: Mechanical evaluation of micromaterials |
|
Kohji Minoshima; Kenjiro Komai |
427 |