Vol. 49 No. 5 CONTENTS
Special Issue on
Composite Materials
General Paper

Special Issue on Composite Materials (Vol.49 No.5)

Foreword

Toru Fujii

481

Original Paper (Vol.49 No.5)

Dispersions of Particles and Heat Resistance in a Cu-Fe-P Alloy

Kazuhisa Kita, Kazunori Kobayashi, Ryoichi Monzen

482

Decomposition of Amine Cured Epoxy Resin by Nitric Acid for Recycling

Masatoshi Kubouchi, Hideki Sembokuya, Shuro Yamamoto, Kazuyoshi Arai, Ken Tsuda

488

Modeling of Cracking Damage Evolution in FRP Crossply Laminates under Bending

Akihiro Wada, Shinya Motogi

494

In-Situ Observation and Simulation of Tensile Fracture Behavior of Unidirectional Si-Ti-C-O/BMAS Composite Materials

Mototsugu Tanaka, Ikuo Okumura, Shojiro Ochiai, Masaki Hojo, Takemi Yamamura, Mitsuhiko Sato, Makoto Tamura

502

Static and Fatigue Failure of FW-CFRP Tubes under Pure Torsion

Hiroshi Kawakami, Toru Fujii

510


General Paper (Vol.49 No.5)

Review paper (Vol.49 No.5)

Ground Improvement for Enviromental Problems

Kohei Sawa

515

Original Paper (Vol.49 No.5)

Synthesis of SnO2 Microcapsule Containing Cu by Colloidal Process and Its Application to Semicondutive Glass Composite

Haruhisa Shiomi, Kousuke Inada, Nobuyuki Komatsu

521

Criterion on Local Instability for Dislocation Nucleation in Nickel Crystal

Takayuki Kitamura, Yoshitaka Umeno, Shigeyuki Noda

527

X-Ray Stress Measurement of Silicon Single Crystal

Hiroshi Suzuki, Koichi Akita, Hiroshi Misawa

534

On Analysis of Joining Process of Polyethylene Pipes

Masaru Zako, Makoto Fujihara, Koji Ichikawa

541

Effect of Water Environment and Cyclic Loading on Fatigue Crack Growth of Alumina and Zirconia

Zhu Ping, Kiyohiko Ikeda, Koichi Kaizu

547

Measurement of Work Hardening, Anisotoropy and the Baushinger Effect in Mild Steel by Off-Axis Torsion Tests

Takenobu Takeda, Zhongchun Chen, Manabu Tsuchiya

555

In-Situ Observation in Adhesive Layer of Adhesively Bonded Butt Joints with a Thin Adherend under Cyclic Loading

Makoto Imanaka, Koichi HIdaka, Takafumi Turui, Yojirou Akizuki, Akira Matayoshi

561

Fatigue Crack Propagation and Fracture Surface in Polyvinyl Chloride

Tetsuro Shiraishi

567

Fracture Mechanics Analysis of Edge-Indentation Method for Evaluation of Delamination Strength of Coating

Dongkun Zhang, Masahiko Kato, Keijiro Nakasa

572

Lecture (Vol.49 No.5)

Recent Advances in Polymeric Materials@T:Polymer Rheology

Masaoki Takahashi

579