Fracture of Notched Wood under Impact Load
Kiyoshi Sato, Hisato Yamamoto and Takeshi Yamanouchi
Vol. 49 No. 8 CONTENTS
Special Issue on Fracture Mechanics
General Paper
Special Issue on Fracture Mechanics (Vol.49 No.8)
Foreword | |
Shiro Kubo |
835 |
Technical Note (Vol.49 No.8)
Fracture of Notched Wood under Impact Load |
|
Kiyoshi Sato, Hisato Yamamoto and Takeshi Yamanouchi |
836 |
Original Paper (Vol.49 No.8)
Stress Intensity Factors for Inner Surface Circumferential Crack in Finite Length Cylinders |
|
Toshiyuki Meshii, Shuji Hattori and Katsuhiko Watanabe |
839 |
Systematization of Simplified J-Integral Evaluation Method for Flaw Evaluation at High Temperature |
|
Naoki Miura, Takahi Shimakawa, Yasunari Nakayama and Yukio Takahashi |
845 |
Verification of Simplified J-Integral Evaluation Method for Flaw Evaluation at High Temperature |
|
Takashi Shimakawa, Naoki Miura, Yasunari Nakayama and Yukio Takahashi |
851 |
Elastic-Plastic Boundary Element Analysis of Interface Edge in Bonded Dissimilour Materials |
|
Jinquan Xu, Liedong Fu and Yashiharu Mutoh |
857 |
Analysis of Interface Crack with Frictional Contact between Fiber and Matrix in Fiber Reinforced Composites |
|
Jinquan Xu, Yoahiharu Mutoh and Yihua Liu |
862 |
The Morphology of the Hertzian Cone in Plate Glass by Projectile Impact |
|
Akihiko Miyamoto and Yukitaka Murakami |
867 |
Fatigue Crack Propagation Behavior in a Strip and Its Simulation Analysis |
|
Hironobu Nisitani, Tetsuya Takeno, Keisuke Fukuyama, Naoki Tatibana and Akihide Saimoto |
873 |
Experimental Simulation of Propagating Paths of Fatigue Cracks near or across the Interface of Bonded Dissimilar Materials by Using the Proposed Equivalent Specimens |
|
Kiyotsugu Ohji, Tetsuya Tsujikami and Kenji Hiraoka |
879 |
Technical Note (Vol.49 No.8)
Micro Aspect of Damaged Surface of Cavitation Erosion |
|
Koichi Yamanaka and Kazunobu Makiyama |
885 |
Original Paper (Vol.49 No.8)
Synthesis and Microstructure of Fe-Substituted Mordenite |
|
Atsushi Nakahira, Shunichi Nishimura and Satoru Ueda |
887 |
The Evaluation of Oxidation Behaviors and Mechanical Properties of C/C Composite with Two Different Types Carbon Fiber |
|
Chihiro Mochizuki and Yuji Kimura |
892 |
A Benefical Effect of Compressive Loading on High Temperature Flexural Fatigue Resistance in Si3N4 Ceramics |
|
Keiji Ogura, Izuru Nishikawa, Hiroyuki Motohashi and Kimiyasu Okano |
899 |
Study on Optimum Thickness of Interlayer in Ceramic/Metal Joints |
|
Manabu Takahashi, Nagatoshi Okabe, Xia Zhu, Kenichiro Kagawa and Hideo Kobayashi |
905 |
Effect of a Delamination Initiation Strength between Thermal Barrier Coating and Base Metal on Thermal Aging |
|
Masayuki Arai, Uichi Iwata, Toshio Sakuma and Masahiro Saitoh |
912 |
Thermal Aging Embrittlement of W Alloyed 9%Cr Ferritic Steels and Its Evaluation by Electrochemical Technique |
|
Shin-ichi Komazaki, Shigeo Kishi, Tetsuo Shoji Hideki Chiba and Koshi Suzuki |
919 |
Application of Anti-Washout Underwater Concrete as a Filling Material for Subground of Immersed Tunnel Elements |
|
Kiyofumi Sano, Fumihito Matsumoto, Eiji Sueoka, Satoshi Maeda, Isamu Nakamura and Toyoaki Miyagawa |
927 |
Fatigue Failure Criterion for Notched Plates of a Glass Fiber-Reinforced Polycarbonate |
|
Toshihiro Yamamoto and Hiizu Hyakutake |
935 |
Nondestructive Damage Characterization of Carbon Fiber Composites through Improved Thermoelastic Technique |
|
Toshiyuki Uenoya and Toru Fujii |
941 |
Lecture (Vol.49 No.8)
Ground Improvement and Its Environmental Impacts@T:Ground Improvement and Geo-Environmental Problems |
 |
Masashi Kamon |
948 |
