Vol. 50 No. 7 CONTENTS
Special Issue on
X-ray Study on Deformation and Fracture of Solid
General Paper

Special Issue on X-ray Study on Deformation and Fracture of Solid (Vol.50 No.7)

Foreword

T.Hanabusa

689

Technical Note (Vol.50 No.7)

Elastic Constants of Alumina and Silicone Nitride Measured by Using Synchrotron Radiation Source

Yasuo YOSHIOKA, Koichi AKITA and Hiroshi SUZUKI

690

Original Paper (Vol.50 No.7)

X-Ray Fractography of Fatigue Fracture Surface under Mode T and Mode V Loading

Yoshiaki AKINIWA, Keisuke TANAKA@and Tsuyoshi TSUMURA

695

Development of Measurement Technique for Lattice Spacing at Strain Free by Neutron Diffraction Method

Toru SAITO, Nobuaki MINAKAWA, Yukio MORII, Toshihiko SASAKI and Yukio HIROSE

701

Effects of Processing Conditions on Structure of TiN Films Deposited by Arc Ion Plating

Tatsuya MATSUE, Takao HANABUSA and@Yasukazu IKEUCHI

707

Residual Stress Measurement of Ground Composite Materials Prepared by Powder Metallurgy

Shigeki TAKAGO, Toshihiko SASAKI and Yukio HIROSE

713

X-Ray Study of Chromium Plating Layer by Pulse Current Electrolysis

Yuichi KOBAYASHI, Jun-ichi NAGASAWA, Kazuo WATANABE, Toshihiko SASAKI and Yukio HIROSE

719

Measurement of Hydrogen in BCN Films by Nuclear Reaction Analysis

Haruyuki YASUI, Yukio HIROSE, Toshihiko SASAKI, Kaoru AWAZU and Hiroshi NARAMOTO

727

Development of Thick TiN Film on Aluminum Substrate and Its Wear Properties

Takao HANABUSA, Tadakazu MORIGUCHI, Kazuya KUSAKA, Tatsuya MATSUE

732


General Paper (Vol.50 No.7)

Original Paper (Vol.50 No.7)

Transition of Plastic Buckling Modes for Circular Tubes Subjected to an Impact Axial Compressive Load

Katsuhiko MURASE, Hitoshi WADA and Norman JONES

739

Static Loading Tests of Glued Laminated Timber Joints with Drift-Pins -The Effect of MOE on Anisotropy of Mechanical Property-

Masaki HARADA, Tomoyuki HAYASHI, Masahiko KARUBE, Akimitsu IIDA, Kohei KOMATSU

745

Damage Behavior of Adhesively Bonded Butt and Scarf Joints under Cyclic Loading Conditions

Kiyoshi ISHII, Makoto IMANAKA, Hideaki NAKAYAMA and Hitoshi KODAMA

751

Fretting Fatigue Properties and Detection of Crack Initiation of Inconel Alloy

Takao UTSUNOMIYA, Ken SUGIMOTO, Chobin MAKABE and Kunihiro IIDA

758

Evaluation of Fracture Strength and Interfacial Strength of Titanium-Nitride Layers Formed by Gas-Nitriding of Titanium

Xu YAN, Masahiko KATO, Keijiro NAKASA and Kenji MORITA

764

Viscoelastic and Tribological Properties of Epoxy Resins

Hideki YAMANE, Takeshi KOKUBO, Masaoki TAKAHASHI and Toru HORIUCHI

772

Evaluation of r-Value of Stainless Steel with Electromagnetic Transducer

Riichi@MURAYAMA

778

X-Ray Stress Measurements of Single Crystal in Local Area Using Synchrotron Radiation

Hiroshi SUZUKI, Koichi AKITA, Yasuo YOSHIOKA, Hiroshi MISAWA

783

Depth Effects on Young's Modulus and Bending Strength in Spruce Glued Laminated Beam

Ryosuke SATO, Takashi TAKEDA@and Naoto ANDO

790

Lecture (Vol.50 No.7)

Application of Reliability Engineering for Safety Design and Maintenance against Mechanical Structure and Components Z:Application for Aircraft Structure

Ryuuji YOSHINAGA

796