Vol. 51 No. 1 CONTENTS
Special Issue on Ground Improvement
Special Issue on Reliability Engineering
General Paper

Special Issue on Ground Improvement (Vol.51 No.1)

Foreword

M.Kamon

 1

Original Paper (Vol.51 No.1)

Mechanical Properties of Lightweight Soil Mixed with Wasted Rigid PUF

Ryoichi FUKAGAWA, Takeshi KATSUMI, Misato SHIMIZU and Masahiro WATANABE

 2

Shear Resistance and Deformation Characteristics of Sedimented Coal Fly Ash-Cement Mixture

Daisuke SUETSUGU, Keiji KOGURE, Yoshihisa MIYATA and Hidetoshi OCHIAI

 8

Development of Triple Liner System with Polyurethane Elastomer Grouted between Double Geomembrane Sheets

Masashi KAMON, Tomoyuki AKAI, Akira MATSUMOTO, Sumio YANAGIHARA, Kenji SHIOTA and Kiyoshi IWATA

 13

Effect of the Mixing Properties on Hydraulic Containment Performance of Soil-Cement Applied to Cutoff Wall

Takeshi KATSUMI, Masato WATANABE, Iwao SUMINAGA and Ryoichi FUKAGAWA

 19

Engineering Characteristics of Soft Soft Ground Reinforced by Pri-Fabricated Band-Shaped Drain and Discharge Capacity

Masashi KAMON, Masaaki KIYAMA, Seiji SUWA, Mitsuharu FUKUDA and Tomoe SHIMONODAN

 25

Strength Characteristics of Cement Treated Hedoro Mixed with Coal Fly Ashes

Kohei SAWA, Seishi TOMOHISA, Satoshi MARUYAMA and Atushi OGAWA

 30

Suitability Assessment of Bentonite-Soil Mixtures as the Landfill Bottom Liner Material

Masashi KAMON, Takeshi KATSUMI, Toru INUI and Tetsuo MORIMOTO

 36

A Laboratory Experiment to Investigate the Applicability of Freezing and Thawing Method for Remediation of Contaminated Ground

Yuzuru ITO, Masashi KAMON and Hiroyuki HATO

 42


Special Issue on Reliability Engineering (Vol.51 No.1)

Foreword

N.Okabe

 47

Original Paper (Vol.51 No.1)

Probabilistic Prediction of the Influence of both Cold Working and Shape Memory Heat Treatment on Transformation Temperature for Ti-41.7Ni-8.5Cu(at%)Shape Memory Alloy

Maho HOSOGI, Nagatoshi OKABE, Toshio SAKUMA and Shuichi Miyazaki

 48

Proposal of Standard Regression Method for S-N Curve Based on Fatigue Test Data for Metallic Materials

Izuru NISHIKAWA, Hidetoshi NAKAYASU, Atsushi SUGETA, Toshinori YOKOMAKU, Sumio YOSHIOKA, Toshio SHUTO, Tomofumi SHINTANI, Takashi SAKAI and Tatsuo SAKAI

 54

Fracture Strength Data Base and Strength Analysis for Ceramic/Metal Joints

Manabu TAKAHASHI, Nagatoshi OKABE, Hideyuki HIRATA, Naoto SHIRAKI and Hideo KOBAYASHI

 61

Application of the First-Order Reliability Method to Probabilistic Failure Assessment Based on the Two-Parameter Approach -A Quantitative Study Using Numerical Examples-

Tetsuya SASAKI

 68

Application of Tunneling Algorithm to Reliability Analysis of Laminated Composite Plate

Nozomu KOGISO, Shuuya NAKAGAWA and Yoshisada MUROTSU

 74

Seismic Reliability Analysis and Reliability-Based Design of Steel Piers of Highway Bridges

Wataru SHIRAKI , Hitoshi INOMO, Masahiro Dogaki and Hiroshi ISHIKAWA

 80

Evaluation on Fatigue Characteristics of Thin Plates for Diaphragm

Masaru ZAKO, Tetsusei KURASHIKI, Satoshi HANAKI, Hiroaki NAKAI, Atsuji ITO and Masao FUKUDA

 88


General Paper (Vol.51 No.1)

Original Paper (Vol.51 No.1)

Oxidation of 8mass% Y2O3ĄZrO2/CoNiCrAlY Thermal Barrier Coating by Heating at High Temperature and Delamination of Top Coat

Lin GAO, Masahiko KATO, Keijiro NAKASA, Teruhito BANSHO and Hidetaka NISHIDA

 95

Effect of Holding at High Temperature on Delamination Strength of 8mass% Y2O3ĄZrO2/CoNiCrAlY Thermal Barrier Coating

Lin GAO, Masahiko KATO, Keijiro NAKASA, Teruhito BANSHO and Hidetaka NISHIDA

 101

Preparation of TiN Films by Ion Mixing and Vapor Deposition Technique and Their Pinhole Defect Evaluation

Hitoshi UCHIDA, Masato YAMASHITA and Kazumasa TOKUDA

 107

Damage Propagation Analysis Method for Matrix Hybrid Laminates Subjected to Three-Point Bending Load

Takafumi ONITA, Tsuyoshi NISHIWAKI and Zen-ichiro MAEKAWA

 112

Lecture (Vol.51 No.1)

Applications of Strength Design and Safety Assessment in Machine and Structure ‡U:Aircraft

Kenichi KATAYANAGI Tetsuya Ohnishi

 118