Consideration on Behavior of Fatigue Crack Propagation by Dislocation Dynamics Simulation |
|
Tatsuro MORITA and Kenji SAITO |
1285 |
Mechanism of Long Life Fatigue Fracture Induced by Interior Inclusion for Bearing Steel in Rotating Bending |
|
Noriyasu OGUMA, Hisashi HARADA and Tatsuo SAKAI |
1292 |
Very High Cycle Fatigue Properties and Fracture Types of Ti-6Al-4V Alloy |
|
Hiroyuki OGUMA, Takashi NAKAMURA, Shuji YOKOYAMA and Toru NOGUCHI |
1298 |
Variable Amplitude Loading Tests for a High Strength Steel Considering the Transition of Failure Mode in High Cycle Regime |
|
Masaki NAKAJIMA, Keiro TOKAJI, Hisatake ITOGA, Toshihiro SHIMIZU and Nami KAMIYA |
1305 |
A Study of Subsurface Crack Initiation and Propagation Mechanism of High-Strength Steel by Fracture Surface Topographic Analysis |
|
Kazuaki SHIOZAWA, Yuuichi MORII, Seiichi NISHINO and Liantao LU |
1311 |
Effect of Core Hardness and Case Depth on Low-Cycle-Impact-Fatigue Property in Carburized Steel |
|
Masayuki HORIMOTO, Hitoshi MATSUMOTO, Taizo MAKINO, Nobuhiro MURAI, Kazuyuki ORITA, Yukio ARIMI, Satoshi FUJIKAWA and Takayuki NISHINO |
1318 |
Effect of Slip Condition on the Contact Fatigue Strength for Pitting of the Carburized Steel |
|
Taizo MAKINO, Masayuki HORIMOTO and Hitoshi MATSUMOTO |
1325 |
Influence of Nitriding Condition on Fatigue Strength of Maraging Steel |
|
Norio KAWAGOISHI, Kazuhiro MORINO, Kazunori FUKADA, Eiji KONDO and Yan NU |
1331 |
Fatigue Crack Propagation Behavior and Fatigue Strength of Al2O3/A6061 MMCs at Room and Elevated Temperatures |
|
Kiyotaka MASAKI, Xinwei CHEN, Yasuo OCHI, Takashi MATSUMURA and Mitsushi WADASAKO |
1337 |
Effect of Crack Closure on the Fatigue Limit of Material Containing Small Defect |
|
Masahiro KASHIWAGI, Takao KUDOU, Masanobu KUBOTA, Chu SAKAE and Yoshiyuki KONDO |
1345 |
Fatigue Life Prediction of Coiled Tubing |
|
Takanori KATO, Miyuki YAMAMOTO, Isao SAWAGUCHI and Tetsuo YONEZAWA |
1351 |
An Analysis of Dynamic Stability of Cross-Ply Laminated Cylindrical Shells under Impact Hydrostatic Pressure |
|
Hirakazu KASUYA and Yasuji YAMAGISHI |
1357 |
Fractographies of Dental Implantation Failure |
|
Tetsuya TAGAWA, Makoto YAMBE, Yasuhiro OKAZAKI, Takashi MIYATA and Minoru UEDA |
1363 |
Fatigue Strength of Laser-Processed Hot Work Tool Steel and Its Reliability |
|
Satoshi HANAKI, Yahong SUN, Masato YAMASHITA, Hitoshi UCHIDA and Nobuhiro TSUJII |
1369 |
Strengthening Mechanism in Alumina Matrix Nanocomposites |
|
Seong-Min CHOI, Sawao HONDA, Tadahiro NISHIKAWA, Hideo AWAJI, Tohru SEKINO and Koichi NIIHARA |
1374 |
Development of Pultrusion Techniques of Phenolic Foam Composite |
|
Goichi BEN and Akiko SHOJI |
1379 |
Estimating Residual Stress Value by Vickers Indentation in Zirconia Ceramics |
|
Tarou TOKUDA and Mitsuo KIDO |
1385 |