Shear Buckling Analysis of Asymmetric Angle-Ply Laminates with Higher-Order Shear Deformation |
 |
Jia XIE, Qing-Qing NI and Masaharu IWAMOTO |
884 |
Static Load Dispersion Analysis of Solid-Air Composites -Effect of Adhesive Film on the Load Dispersion- |
|
Masatoshi MIKI, Tsutao KATAYAMA and Hidetake YAMAMOTO |
891 |
Numerical Optimum Design of Solid-Air Composites -Evaluating Function of the Static Load Dispersion- |
|
Masatoshi MIKI, Tsutao KATAYAMA and Hidetake YAMAMOTO |
897 |
Corrosion Behavior of Epoxy Resin Filled with Ground Resin in Sulfuric Acid Solution |
|
Hideki SEMBOKUYA, Fumihiro SHIRAISHI, Masatoshi KUBOUCHI and Ken TSUDA |
903 |
Retrofiting Method of RC Beams Using Tensioned Carbon Fiber Sheets |
|
Noriyo HORIKAWA, Takayuki KUSAKA, Nobuaki TAKAGI, Hironori NAMIKI and Masumi INOUE |
909 |
Tensile Properties of Manila Hemp Fabric Reinforced Cross-Ply "Green" Composites |
|
Shinji OCHI, Hitoshi TAKAGI and Hideyuki TANAKA |
916 |
Cure Monitoring of CFRP Using Electric Capacitance Change with Applied AC Frequency |
|
Takaomi INADA and Akira TODOROKI |
922 |
Preparation and Structural Control of Porous Hydroxyapatite with Unidirectionally Aligned Continuous Pores |
|
Teisuke SATO, Tatsuo BESSHI, Takuo NAGAMACHI, Tatsuya KATO and Jyunji TAMATANI |
927 |
Crack Initiation and Propagation in Ferrite/Martensite Dual-Phase Steel with Microscopic Heterogeneity by Fracture Toughness Tests |
|
Masahito MOCHIZUKI, Masaru KOHARA, Hiroshi SHIMANUKI, Yukito HAGIWARA and Masao TOYODA |
932 |
Analytical Study on Effects of Microscopic Heterogeneity on Crack Generation in Ferrite/Martensite Dual-Phase Steels |
|
Masahito MOCHIZUKI, Masaru KOHARA, Hiroshi SHIMANUKI, Yukito HAGIWARA and Masao TOYODA |
939 |
Evaluation of Superelastic Behavior by Residual Martensite Volume Fraction in Ti-50.6at%Ni Shape Memory Alloy |
|
Toshio SAKUMA, Makoto YAMADA, Uichi IWATA, Yasuo OCHI, Maho HOSOGI and Nagatoshi OKABE |
946 |
Multi-Scale Finite Element Analysis for Joint Members of Heterogeneous Dissimilar Materials with Interface Crack |
|
Naoki TAKANO, Masaru ZAKO and Yoshihiro OKUNO |
952 |
Tunnel Deformation Behavior due to Ground Surface Excavation above the Tunnel |
|
Yoshiyuki KOJIMA, Toshihiro ASAKURA, Kazuyuki YOSHIKAWA, Yoshiyuki SHIGETA, Takashi TUCHIYA and Koji NAKAGAWA |
958 |
Factors Influencing the Formation of ODA in Ultralong Fatigue Regime |
|
Junji NAGATA and Yukitaka MURAKAMI |
966 |
Effects of Stress Triaxiality on Ductile Fracture and Constraint on Fracture Toughness in Al-Alloys |
|
Seiji KANAMORI, Tetsuya TAGAWA and Takashi MIYATA |
974 |
Dyanamic Deformation Behavior and Microstructure Evolution of 5000 Series Aluminum Alloys |
|
Tomokazu MASUDA, Toshiro KOBAYASHI, Hiroyuki TODA and Lei WANG |
981 |
Influence of Added Electrolyte KCl Concentration on Dispersion of Almina Aqueous Slurry |
|
Osamu TAKAGI, Kazuyuki YOGO, Masakuni OZAWA and Suguru SUZUKI |
988 |
Development of PMMA/Silica Hybrid and Its Material Properties |
|
Yaqin FU, Qing-Qing NI, Ken KURASHIKI and Masaharu IWAMOTO |
992 |
In Situ Crack-Healing Behavior of Mullite/SiC Composite Ceramics |
|
Kotokaze FURUSAWA, Naoki FURUMACHI, Koji TAKAHASI, Sinji SAITO and Kotoji ANDO |
998 |
Study on Digital Photogrammetry for Monitoring System of Deformation in Tunnel |
|
Yuzo OHNISHI, Takumi NAKAI, Meiji RYU and Satoshi NISHIYAMA |
1006 |
