Trend of the Technology of Concrete Admixture
Hiroshi HAYASHI and Shunsuke HANEHARA
Vol. 53 No. 10 CONTENTS
Special Issue on Aggregates and Admixtures for Concrete
General Paper
Special Issue on Aggregates and Admixtures for Concrete (Vol.53 No.10)
Foreword | |
S.Nishibayashi and T.Kojima |
1049 |
Review paper (Vol.53 No.10)
Trend of the Technology of Concrete Admixture |
|
Hiroshi HAYASHI and Shunsuke HANEHARA |
1050 |
Original Paper (Vol.53 No.10)
ASR Expansion of Concrete or Mortar Affected by Electric Field |
 |
Takao UEDA, Keisuke YAMAGUCHI, Akira NANASAWA and Masanobu ASHIDA |
1059 |
Development of Evaluation Method of Alkali-Silica Reactivity of Concrete Using River Sand and Gravel in Hokuriku District |
|
Masahiro NOMURA, Kazuyuki TORII and Minobu AOYAMA |
1065 |
Deflections and Cracking of Full Scale Specimens with Recycled Coarse Aggregate Concrete Processed by a Decompression and Rapid Release |
|
Keiichi IMAMOTO, Yoshimoto KIMURA, Masaru NAGAYAMA and Hiroshi TAMURA |
1071 |
Properties of Concrete with Decomposed Granite as Fine Aggregate |
|
Shoichi INOUE, Tamotsu KURODA, Shinsaku MATSUI and Akira YOSHINO |
1077 |
Influence of Curing Method in the Cold Weather on Fresh and Hardened Properties of High Fluidity Concrete with Various Admixtures |
|
Sakae USHIJIMA and Isao FUNAKAWA |
1083 |
Some Properties of Concrete Containing Sludge Water with Setting Retarder |
|
Junji NAKAMOTO, Kazuo TOGAWA, Yoshitaka MITSUIWA and Toshiyuki TANI |
1091 |
Properties of Polymer-Modified Mortars with Nitrite-Type Hydrocalumite |
|
Yuichi MIYAMOTO, Yoshihiko OHAMA and Hidenobu TATEMATSU |
1097 |
Effects of Polymer Dispersion and Redispersible Polymer Powder on Properties of Polymer-Modified Mortars |
|
Hiroyuki SAKAKIBARA, Shigehiro ANDO, Keiiti OSAKI , Akihiro KAWAKAMI, Takahiko SASAKI, Hiroshi UEDA and Shinji FUJIWARA |
1103 |
Microcracking and Compressive Strength Degradation of Carbon Fiber/Polyimide Resin Composites by Thermal Cycling |
|
Hisaya KATOH, Toshiyuki SHIMOKAWA, Yasumasa HAMAGUCHI, Hiroshi MIZUNO, Hroyuki NAKAMURA and Ryoji ASAGUMO |
1109 |
Fatigue Damage of Copper with Ultra-Fine Structure Due to ECAP |
|
Masahiro GOTO, Seung-Zeon HAN, Cha-Yong LIM,　Terutoshi YAKUSHIJI, Tetsushi MORITA and Takaei YAMAMOTO |
1117 |
Effect of BN Content and Load Variation on Fatigue Crack Growth Behavior on Si3N4-BN Composite Ceramics |
|
Atsuhiro KOYAMA, Atsushi SUGETA, Yoshihiko UEMATSU and Masahiro JONO |
1124 |
Fatigue under Mixed Mode Loading of Vibratory Stress and Start-Stop Cycling |
|
Yoshiyuki KONDO, Chu SAKAE, Masanobu KUBOTA and Hiroki KITAHARA |
1130 |
Prediction of Fatigue Strength of Spot-Welded Joints Based on Local Material Strength Properties Measured by Small Specimen |
|
Eisuke NAKAYAMA, Mitsuo MIYAHARA, Kazuo OKAMURA, Hiroki FUJIMOTO and Kiyoyuki FUKUI |
1136 |
Dismantlable Adhesive and Evaluation of Practical Uses for Building Materials |
|
Hiroyuki ISHIKAWA, Kazuo SETO, Sumiya SHIMOTUMA, Nobuo KISHI and Chiaki SATO |
1143 |
Strength of Ring-Crack Caused by Sphere-Plate Contact of Ceramics |
|
Manabu TAKAHASHI, Nagatoshi OKABE, Xia ZHU and Minoru MATSUI |
1149 |
Current Industrial Applications of Reliability Engineering and Some Subjects to be Solved in the Future â…¡:Current Situations and Subjects on Application of Reliability Engineering in Construction Industries |
|
Makoto SUZUKI and Wataru SHIRAKI |
1156 |