Quantitative Analysis of Polymer Materials' Surfaces Using ATR-FTIR
Daisuke TATSUMI
Vol. 54 No. 4 CONTENTS
Special Issue on Wood and Wood Based Material
General Paper
Special Issue on Wood and Wood Based Material (Vol.54 No.4)
Foreword | |
T.Matsumoto |
357 |
Technical Topics (Vol.54 No.4)
Quantitative Analysis of Polymer Materials' Surfaces Using ATR-FTIR |
|
Daisuke TATSUMI |
358 |
Original Paper (Vol.54 No.4)
Rationality of Kiri Wood(Paulownia tomentosa)in Traditional Uses |
 |
Kazuya MINATO, Yuko ITO and Haruka SUGAWARA |
361 |
Effect of Subsequent Kiln-Schedule after the High-Temperature Setting Treatment on Internal Stresses of Sugi Boxed-Heart Timber without Back-Splittings |
|
Morihiko TOKUMOTO, Takashi TAKEDA and Takahisa YOSHIDA |
365 |
Drying of Sugi Logs with Microwave Heating |
|
Noboru FUJIMOTO, Yuusuke MORITA, Takeshi OOUCHI, Han Chien LIN, Kanehiro OOHASHI and Kazuyuki KONDO |
371 |
Effects of Basic Wood Properties on Strength and Stiffness in Bending of Cryptomeria japonica Timbers |
|
Yoshio KIJIDANI and Ryushi KITAHARA |
377 |
Mechanical Properties of Timber Joints with Thick Particleboards and Screws -Relationships between Shapes of Screws and Characteristic Values of the Joints- |
|
Masaki HARADA, Masako NAKAZAWA, Tomoyuki HAYASHI and Masahiko KARUBE |
381 |
Application of Particulate Materials to a Physical Barrier against Termites -Effects of Size, Shape and Surface Properties of Particles on the Penetration Behavior of Termites- |
|
Yoshiyuki YANASE, Yoshihisa FUJII, Shogo OKUMURA, Tsuyoshi YOSHIMURA, Yuji IMAMURA, Mitsuyoshi ISHIDA, Hirotoshi KAWAGUCHI and Toshinobu OKUMURA |
387 |
Original Paper (Vol.54 No.4)
Synthesis of a Nanocomposites of Zr-Containing Nanoparticle/Poly(Ethylene Terephthalate) Via Polymerization |
|
Tsutomu MORIMOTO, Minoru YOSHIDA and Kikuo OKUYAMA |
393 |
Deformation and Localized Necking Mechanism of Nanocrystalline Materials by Molecular Dynamics Simulation (Relationship between Intergranular Deformation and Intragranular Deformation of Nanocrystalline Materials) |
|
Tomotsugu SHIMOKAWA, Toshiyasu KINARI, Sukenori SHINTAKU, Akihiro NAKATANI and Hiroshi KITAGAWA |
399 |
Analysis of Surface Roughening with Uniaxial Tension of Polycrystalline Aluminum by Autocorrelation Function |
|
Hualin SONG, Takeji ABE and Naoya TADA |
407 |
Viscoplastic Constitutive Equation Describing Inelastic Behavior of Polymers under Reverse Loading |
|
Mamoru MIZUNO and Yukio SANOMURA |
414 |
Effect of Hydrogen on High Cycle Fatigue Failure of High Strength Steel, SCM435 |
|
Yukitaka MURAKAMI and Junji NAGATA |
420 |
A Simplified Analysis of Crack Growth in a Steady State of Piezoelectric Ceramics by the Double Cantilever Beam Model |
|
Mamoru MIZUNO, Yoshinori HONDA and Hiroyuki KATO |
428 |
Analysis of Isotropic Elastic Medium with Layered Elliptic Inclusion under In-Plane Loads and Its Stress Intensity-Factor |
|
Yuji MATSUDO, Masashi KUROSE and Ken-ichi HIRASHIMA |
434 |
In-situ Measurement of Internal Stresses in Solid Oxide Fuel Cells during Thermal Cycling by Synchrotron Radiation |
|
Hirofumi SUMI, Yasunobu MIZUTANI, Yoshihisa DOI, Yoshiaki AKINIWA and Keisuke TANAKA |
440 |
Influence of WC Grain Size and Co Mass Content on Mechanical Properties of WC-Co Cemented Carbides |
|
Shingo OKAMOTO, Kakuroh OHTUKA, Yuji NAKAZONO, Yoshinobu SHIMOITANI and Jun TAKADA |
447 |
Thermal Expansion Behavior of Polystyrene Blended Porous Silica through Psuedo-Phase Separation |
|
Narihiro MATSUDA, Masaki HIROSE, Kenji TAKASA, Mitsuru TANAHASHI and Kunihiko TAKEDA |
453 |
Lecture (Vol.54 No.4)
The Environment and Polymeric Materials‡W:Polymer Materials Guided by Nature and Tradition |
|
Kunihiko TAKEDA |
459 |
