Contents54-5

Vol. 54 No. 5 CONTENTS
Special Issue on The Frontier of Applications for Composite Material
General Paper

Special Issue on The Frontier of Applications for Composite Material (Vol.54 No.5)

Foreword
Q.-Q.Ni	469

Original Paper (Vol.54 No.5)

Spark Plasma Sintered Joining between Lead Zirconate Titanate and Aluminum with Sn-3.5Ag Alloy Powder as an Insert Material

470

Temperature Effect on Bonding and Debonding Behavior between FRP Sheets and Concrete

Zhishen WU, Kentaro IWASHITA, Syun YAGASHIRO, Takashi ISHIKAWA, Yasumasa HAMAGUCHI
474

Development of Glass Fabric Reinforced SDR Damping Material and its Mechanical Behavior

Fei CHENG, Qing-Qing NI and Masaharu IWAMOTO
481

DMA Behaviors of CFRP/SDR Sandwich Laminates with Damping Rubber Sheet

Fei CHENG, Qing-Qing NI and Masaharu IWAMOTO
487

Fatigue Damage Evaluation of Plain-Woven Carbon/Epoxy Composites by Using Thermo-Elastic Technique

Yasuhiro NISHIKAWA, Kazuya OKUBO, Toru FUJII and Toshiyuki UENOYA
494

Study on Application of Massage Chair Arm Using CFRP and Evaluation of Massage Comfort

Morimasa NAKAMURA, Naoki KOTANI, Takashi MATSUOKA, Kazuhiko SAKAGUCHI and Hideshi KONDO
500

Real-Time Cure and Health Monitoring of FW FRP by Using Built-In FBG Sensors

Tatsuro KOSAKA, Akira NAKAMURA, Katsuhiko OHSAKA and Yoshihiro SAWADA
507

Research on Development of CAE System for Rigidity Forecast in SMC Structure

Tsutao KATAYAMA, Masahiro SHINOHARA, Masahiro HAKOTANI and Naoyuki NIOKA
513

General Paper (Vol.54 No.5)

Technical Note (Vol.54 No.5)

Characteristics of Static Friction in Sea Water on Universal Joint Member Materials

Kenzo MIURA, Kazunori TAKATA, Kazumasa FUJIWARA and Yosinori SHIMOSAKO
519

Original Paper (Vol.54 No.5)

The Phenomenon of Static Strain-Aging in Fe-30%Cr Alloys

Motohiko KOUSHIMA, Satoshi MOROMI and Sei MIURA
524

Dynamic Strain-Aging in Fe-30%Cr Alloys

Mtohiko KOUSHIMA and Sei MIURA
529

Development of Seismic Ni-Cr Austenitic Steels

Hirofumi YOSHIMURA, Hirofumi INOUE, Kiyoshi OSHIME, Jun NAKAHIGASHI and Terufumi SUMIMOTO
534

Discrete Dislocation Analysis of Fatigue Crack Kinking Behavior

Atsushi SUGETA, Yasuko MOTOYASHIKI, Yoshihiko UEMATSU, Takuya MORIYAMA and Masahiro JONO
540

Fatigue Strength of Laser Welded Butt Joints of Different Thickness Steel Sheets with Underfilled Weld Beads

Hiroshi TSUDA, Yoshihiko SUNAYAMA, Masashi DAIMARUYA and Hidetoshi KOBAYASHI
546

Lecture (Vol.54 No.5)

Stress Evaluation by Diffraction using Neutron and Synchrotron RadiationⅠ:Measurement of Internal Distribution of Residual Stress Using High-Energy X-Rays

Kenji SUZUKI and Keisuke TANAKA
553

Spark Plasma Sintered Joining between Lead Zirconate Titanate and Aluminum with Sn-3.5Ag Alloy Powder as an Insert Material
	470
Temperature Effect on Bonding and Debonding Behavior between FRP Sheets and Concrete
Zhishen WU, Kentaro IWASHITA, Syun YAGASHIRO, Takashi ISHIKAWA, Yasumasa HAMAGUCHI	474
Development of Glass Fabric Reinforced SDR Damping Material and its Mechanical Behavior
Fei CHENG, Qing-Qing NI and Masaharu IWAMOTO	481
DMA Behaviors of CFRP/SDR Sandwich Laminates with Damping Rubber Sheet
Fei CHENG, Qing-Qing NI and Masaharu IWAMOTO	487
Fatigue Damage Evaluation of Plain-Woven Carbon/Epoxy Composites by Using Thermo-Elastic Technique
Yasuhiro NISHIKAWA, Kazuya OKUBO, Toru FUJII and Toshiyuki UENOYA	494
Study on Application of Massage Chair Arm Using CFRP and Evaluation of Massage Comfort
Morimasa NAKAMURA, Naoki KOTANI, Takashi MATSUOKA, Kazuhiko SAKAGUCHI and Hideshi KONDO	500
Real-Time Cure and Health Monitoring of FW FRP by Using Built-In FBG Sensors
Tatsuro KOSAKA, Akira NAKAMURA, Katsuhiko OHSAKA and Yoshihiro SAWADA	507
Research on Development of CAE System for Rigidity Forecast in SMC Structure
Tsutao KATAYAMA, Masahiro SHINOHARA, Masahiro HAKOTANI and Naoyuki NIOKA	513

Characteristics of Static Friction in Sea Water on Universal Joint Member Materials
Kenzo MIURA, Kazunori TAKATA, Kazumasa FUJIWARA and Yosinori SHIMOSAKO	519

The Phenomenon of Static Strain-Aging in Fe-30%Cr Alloys
Motohiko KOUSHIMA, Satoshi MOROMI and Sei MIURA	524
Dynamic Strain-Aging in Fe-30%Cr Alloys
Mtohiko KOUSHIMA and Sei MIURA	529
Development of Seismic Ni-Cr Austenitic Steels
Hirofumi YOSHIMURA, Hirofumi INOUE, Kiyoshi OSHIME, Jun NAKAHIGASHI and Terufumi SUMIMOTO	534
Discrete Dislocation Analysis of Fatigue Crack Kinking Behavior
Atsushi SUGETA, Yasuko MOTOYASHIKI, Yoshihiko UEMATSU, Takuya MORIYAMA and Masahiro JONO	540
Fatigue Strength of Laser Welded Butt Joints of Different Thickness Steel Sheets with Underfilled Weld Beads
Hiroshi TSUDA, Yoshihiko SUNAYAMA, Masashi DAIMARUYA and Hidetoshi KOBAYASHI	546

Stress Evaluation by Diffraction using Neutron and Synchrotron RadiationⅠ:Measurement of Internal Distribution of Residual Stress Using High-Energy X-Rays
Kenji SUZUKI and Keisuke TANAKA	553