Ultrafast Laser Spectoscopic Study of High Pressure Fluids
Noritsugu KOMETANI and Kimihiko HARA
Vol. 55 No. 3 CONTENTS
Special Issue on Processing and Properties of Materials under Extrieme Environment
General Paper
Special Issue on Processing and Properties of Materials under Extrieme Environment (Vol.55 No.3)
Foreword | |
M.Ueno |
247 |
Review paper (Vol.55 No.3)
Ultrafast Laser Spectoscopic Study of High Pressure Fluids |
|
Noritsugu KOMETANI and Kimihiko HARA |
248 |
Original Paper (Vol.55 No.3)
Resource Recovery from Cemented Carbide by Subcritical Hydrothermal Treatment |
 |
Ryo SASAI, Fumihito INAGAKI, Ning-Feng GAO and Hideaki ITOH |
254 |
Fabrication of Meta-Stable Monoclinic Zirconia Ceramics with a High Density Using a Piston-Cylinder Type High-Pressure Apparatus |
|
Katsuya TAKAOKA, Ken HIROTA, Masaki KATO, Osamu YAMAGUCHI and Satoshi OHTAKA |
258 |
Effect of Grain Arrangement on Driving Force of Crack Propagation in High-Temperature Fatigue of Ni-Based Directionally Solidified Superalloy |
|
Masato YAMAMOTO, Takashi OGATA and Takayuki KITAMURA |
264 |
HIP Production of Diamond/SiC Composite and Their Application to High-Pressure Anvils |
|
Osamu OHTAKA, Masaru SHIMONO and Shoichi KUME |
271 |
Strain-Rate Dependence on Stress-Strain Characteristic of the Shock Wavefront in Two Kinds of Glassy Polymers |
|
Yasuhisa SATO, Taku UENO, Keiou NISHIMURA, Kazunari SUZUKI and Yuhichi OGAWA |
276 |
Original Paper (Vol.55 No.3)
Influence of Arsenic Atoms on the Rate of Solid Phase Epitaxy:Molecular Dynamics Study |
|
Satoshi IZUMI, Katsunari MURAI, Shotaro HARA, Tomohisa KUMAGAI and Shinsuke SAKAI |
285 |
Proposal of a Reliability-Based Design Method for Static and Fatigue Strength of MEMS Micromirror |
|
Satoshi IZUMI, Masayuki KADOWAKI, Shinsuke SAKAI, Yuzuru UEDA and Atsushi SUZUKI |
290 |
Extra Long Life Fatigue Properties of Aluminum Die Casting Materials |
|
Koji YAMADA and Susumu MIYAKAWA |
295 |
Effects of Surface Roughness and Residual Stress on Fatigue Strength of Shot Blasted Ductile Cast Irons with Casting Surfaces |
|
Junichiro YAMABE and Motokazu KOBAYASHI |
301 |
High Temperature Fatigue Life Analysis of Single Crystal Ni-Base Superalloys Considering ƒÁ/ƒÁ'Microstructure |
|
Motoki SAKAGUCHI and Masakazu OKAZAKI |
309 |
Self-Healing Effedt of B Segregation on Creep Cavitation in Type 347 Austenitic Stainless Steel |
|
Norio SHINYA Junro KYONO and Kinker LAHA |
317 |
The Effect of the Loading Rate on Stress-Strain Characterization of Tuff |
|
Yuichi KOHMURA and Yoshinori INADA |
323 |
Bending and Vibration Properties of SMP/CFRP Hybrid Laminates |
|
Chun-Sheng ZHANG, Qing-Qing NI, Ken KURASHIKI and Masaharu IWAMOTO |
329 |
Evaluation of Blind Via Hole Quality on Multi-Layer Printed Wiring Boards by Cu Direct Laser Drilling |
|
Toshiki HIROGAKI, Eiichi AOYAMA, Keiji OGAWA, Ryu MINAGI, Toshiki MURAKAMI and Nobuyuki DOI |
335 |
Lecture (Vol.55 No.3)
Composite Science/Technology and New Challenges for Tomorrow's Applications ‡V:Monitoring and Evaluation of Damages and Fractures in Composite Materials |
|
Toshiyuki UENOYA and Yoshihiro MIZUTANI |
341 |
