Contents55-7

Vol. 55 No. 7 CONTENTS
Special Issue on X-ray Study of Mechanical Behavior of Materials
Special Issue on Ceramic Materials
General Paper

Special Issue on X-ray Study of Mechanical Behavior of Materials (Vol.55 No.7)

Foreword
Y.Akiniwa	619

Original Paper (Vol.55 No.7)

Nondestructive Prediction of Induction-Hardened Zone Depth in Carbon Steel by Micro X-Ray Beam

Yoshihisa SAKAIDA, Shogo KASHIWAGI, Yozo SAWAKI, Hazime Yoshida and Kamon KATAGIRI
620

X-Ray Evaluation of Deformation Damage in Electrodeposited Copper Foil under Tensile and Fatigue Loading

Yoshiaki AKINIWA, Tsuyoshi SUZUKI, Kenji AOKI, Masanori KAWAI and Keisuke TANAKA
627

Residual Stress and Deformation Characteristics of Thermal Barrier Coatings on Curved Substrate

Kenji SUZUKI, Masashi KAWAMURA, Takahisa SHOBU, Keisuke TANAKA and Yoshiaki AKINIWA
634

Experimental Study on Compressive Residual Stress Evolution by Pulse Laser Irradiation

Hirotomo TANAKA, Koichi AKITA, Yuji SANO, Naruhiko MUKAI and Shin-ichi OHYA
641

Application of Strain Scanning Method to Stress Measurement of Austenitic Stainless Steel

Takahisa SHOBU, Jun'ichiro MIZUKI, Kenji SUZUKI, Hiroshi SUZUKI, Yoshiaki AKINIWA and Keisuke TANAKA
647

Stress Measurement near Surface Region by Strain Scanning Method Using Neutron Diffraction

S.Machiya, Y.Akiniwa, H.Kimura, K.Tanaka, H.Suzuki, A.Moriai and Y.Morii
654

Special Issue on Ceramic Materials (Vol.55 No.7)

Original Paper (Vol.55 No.7)

Microstructure of Tubular Sic Ceramics Made from Bamboo-Charcoal

Hiromi NAKANO, Takayuki NAGASE, Takeshi SHIONO and Toshihiko NISHIDA
661

Hydrothermal Synthesis of H-Ti-O Nanotubes and Their Structural Evaluation

Takashi KUBO, Tetsuo HONMA, Masanori UMESAKI and Atsushi NAKAHIRA
666

Hardening Mechanism of Refractory Patching Materials with Phosphate Binder

Shinichi SAKIDA, Yuichi YAMAMOTO, Tokuro NANBA, Yoshinari MIURA, Tetsuhiro HAYASHI and Akira YAMAGUCHI
670

Preparation of Glasses Containing Rate Earth Oxide by CO₂ Laser

Takashi WAKASUGI, Hijiri KONUMA, Hideaki YAMAJI and Rikuo OTA
675

Evaluation of Fracture Energy for Chamotte Refractory

Junji TAKANO, Takeshi SHIONO, Yoshiyuki WATANABE and Toshihiko NISHIDA
679

Characterization of alumina/molybdenum Nanocomposites

Seong-min CHOI, Katsuhiro ISHIKAWA, Shinobu HASHIMOTO and Hideo AWAJI
683

Application of Pressurized Fluidized Bed Combustion ash to Phosphorous Adsorbent

M.Shirakawa and H.Shiomi
688

General Paper (Vol.55 No.7)

Original Paper (Vol.55 No.7)

Molecular Dynamics Study on Grain Refinement Process of 兛-Iron by Equal Channel Angular Pressing under Quasi 3-Dimensional Condition

Ryosuke MATSUMOTO, Toshio HAYASHIDA and Michihiko NAKAGAKI
693

Localized Structures in Nonlinear Lattice Systems -Intrinsic Localized Mode- and Its Application to Dynamics of Atoms in Materials

Yusuke DOI, Yu YAMAYOSE, Akihiro NAKATANI and Takayuki KITAMURA
700

Influence of Laser Peening Treatment on High-Cycle Fatigue Properties of Degassing Processed AC4CH Aluminum Alloy

Kiyotaka MASAKI, Yasuo OCHI, Youhei KUMAGAI, Takashi MATSUMURA, Yuji SANO and Hideki NAITO
706

Lecture (Vol.55 No.7)

Actuality and Scope on Simulation of Heat Treatment 嘨: Simulation of Carburized and Nitrided Quenching Process

Dong-Ying JU
712

Nondestructive Prediction of Induction-Hardened Zone Depth in Carbon Steel by Micro X-Ray Beam
Yoshihisa SAKAIDA, Shogo KASHIWAGI, Yozo SAWAKI, Hazime Yoshida and Kamon KATAGIRI	620
X-Ray Evaluation of Deformation Damage in Electrodeposited Copper Foil under Tensile and Fatigue Loading
Yoshiaki AKINIWA, Tsuyoshi SUZUKI, Kenji AOKI, Masanori KAWAI and Keisuke TANAKA	627
Residual Stress and Deformation Characteristics of Thermal Barrier Coatings on Curved Substrate
Kenji SUZUKI, Masashi KAWAMURA, Takahisa SHOBU, Keisuke TANAKA and Yoshiaki AKINIWA	634
Experimental Study on Compressive Residual Stress Evolution by Pulse Laser Irradiation
Hirotomo TANAKA, Koichi AKITA, Yuji SANO, Naruhiko MUKAI and Shin-ichi OHYA	641
Application of Strain Scanning Method to Stress Measurement of Austenitic Stainless Steel
Takahisa SHOBU, Jun'ichiro MIZUKI, Kenji SUZUKI, Hiroshi SUZUKI, Yoshiaki AKINIWA and Keisuke TANAKA	647
Stress Measurement near Surface Region by Strain Scanning Method Using Neutron Diffraction
S.Machiya, Y.Akiniwa, H.Kimura, K.Tanaka, H.Suzuki, A.Moriai and Y.Morii	654

Microstructure of Tubular Sic Ceramics Made from Bamboo-Charcoal
Hiromi NAKANO, Takayuki NAGASE, Takeshi SHIONO and Toshihiko NISHIDA	661
Hydrothermal Synthesis of H-Ti-O Nanotubes and Their Structural Evaluation
Takashi KUBO, Tetsuo HONMA, Masanori UMESAKI and Atsushi NAKAHIRA	666
Hardening Mechanism of Refractory Patching Materials with Phosphate Binder
Shinichi SAKIDA, Yuichi YAMAMOTO, Tokuro NANBA, Yoshinari MIURA, Tetsuhiro HAYASHI and Akira YAMAGUCHI	670
Preparation of Glasses Containing Rate Earth Oxide by CO₂ Laser
Takashi WAKASUGI, Hijiri KONUMA, Hideaki YAMAJI and Rikuo OTA	675
Evaluation of Fracture Energy for Chamotte Refractory
Junji TAKANO, Takeshi SHIONO, Yoshiyuki WATANABE and Toshihiko NISHIDA	679
Characterization of alumina/molybdenum Nanocomposites
Seong-min CHOI, Katsuhiro ISHIKAWA, Shinobu HASHIMOTO and Hideo AWAJI	683
Application of Pressurized Fluidized Bed Combustion ash to Phosphorous Adsorbent
M.Shirakawa and H.Shiomi	688

Molecular Dynamics Study on Grain Refinement Process of 兛-Iron by Equal Channel Angular Pressing under Quasi 3-Dimensional Condition
Ryosuke MATSUMOTO, Toshio HAYASHIDA and Michihiko NAKAGAKI	693
Localized Structures in Nonlinear Lattice Systems -Intrinsic Localized Mode- and Its Application to Dynamics of Atoms in Materials
Yusuke DOI, Yu YAMAYOSE, Akihiro NAKATANI and Takayuki KITAMURA	700
Influence of Laser Peening Treatment on High-Cycle Fatigue Properties of Degassing Processed AC4CH Aluminum Alloy
Kiyotaka MASAKI, Yasuo OCHI, Youhei KUMAGAI, Takashi MATSUMURA, Yuji SANO and Hideki NAITO	706

Actuality and Scope on Simulation of Heat Treatment 嘨: Simulation of Carburized and Nitrided Quenching Process
Dong-Ying JU	712