Effect of Clamping Force on the Strength of Bolted Joints in Pultruded GFRP Laminates
Takeshi KISHIMA
Structure and Mechanical Properties of Nafion Membranes
Takuya ISHIDA, Yutaka KASAI, Kenji URAYAMA and Toshikazu TAKIGAWA
Examination on Properties of Road Surface Repair Material of Cold Hardening Type and Simplified Judging Method of Its Hardening Time
Toru SUZUKI, Makoto KAGAYA and Tetsumi TAKAHASHI
Strength Evaluation of Aluminium Cast Alloy Locally Reinforced by SiC Particles and Al2O3 Whiskers and Its Fractography
Rafiquzzaman MD., Yoshio ARAI and Eiichiro TSUCHIDA
Microstructure, Thermal and Electrical Properties of Aluminum Coatings Produced by Cold Spraying
Yoshiyasu ITOH and Shoko SUYAMA
Fatigue Damage Behavior and Its Controlling Factor in Copper Films Bonded to Base Metal \ Noting Displacement Field in Films and Resin Bonding Layer \
Tashiyuki TORII, DongHui MA, Akira MATSUBA and Kenichi SHIMIZU
Investigation of Rust Layer Formed on Weathering Steel Coated with a Surface Treatment Promoting Protective Rust Formation
Takayuki KAMIMURA, Takashi DOI, Kazuyuki KASHIMA, Norio WAGURE, Shuichi HARA, Katsuya NAKAHARA, Ryuichi ANDO and Hideaki MIYUKI
Installation of Concave Geometry in Thin-Walled Polygonal Shell Members for Controlling Plastic Buckling Behavior
Yoshiaki NAKAZAWA, Kenji TAMURA, Takayuki KUSAKA, Michitaka YOSHIDA and Masaki HOJO
Study on Phase Stress Behavior of SiC Whiskers Reinforced Aluminum Alloy under Elastic-Plastic Deformation
Katsuyuki FUNAKI, Shigeki TAKAGO, Kaname FUJII, Toshihiko SASAKI and Yukio HIROSE
An Analysis of Postbuckling Behavior of Cross-Ply Laminated Curved Plates with Initial Imperfections under Biaxial Compression
Hirakazu KASUYA, Shigeo MAKI, Masayuki TSUJIMOTO and Keiichi NEMOTO
Influence of Alkali Contents of Cement and Testing Methods on Expansion of Mortar Bars due to Alkali-Silica Reaction
Takeyuki KIMIJIMA, Seiichi NAGAOKA, Kimihiko NAKAYAMA and Shigehiro KOBAYASHI
Energetic Study on Defect Structures in Nanocrystalline Aluminum and Copper by Atomic Simulations
Tomotsugu SHIMOKAWA, Tomoyuki HIRAMOTO, Toshiyasu KINARI and Sukenori SHINTAKU
Development and Application of Adiabatic Calorimeter Used for Small Mortar Sample
Eiji MARUYA, Etsuo SAKAI, Seiichi HAGIWARA and Masaki DAIMON
The Influence of Carbonization Temperature of Woodceramics on Crack Generation in Cutting with a Grinding Wheel
Kazuhiko OGAWA,Toshihiro OKABE and Makoto OGAWA
