Characteristics of Alkali Silica Reaction of Siliceous Sedimentary Rocks |
|
Eiji IWATSUKI and Keiji MORINO |
967 |
Expansion Behavior of Prestressed Concrete Beam Deteriorated by Alkali-Silica Reaction under Long Term Exposure Test |
|
Kazunori SASAKI, Shigeru MATSUMOTO, Yoshio HISARI, Kazuhiro KUZUME, Syo KANAUMI and Toyoaki MIYAGAWA |
973 |
Alkali-Silica Reactivity of Andesite in Noto Peninsula and Monitoring of Expansion Behavior of Concrete Bridge Piers |
|
Kazutoshi OKUYAMA and Kazuyuki TORII |
981 |
Control of Alkali-Silica Expansion by Various Surface Systems |
|
Shigeru MATSUMOTO,Kazunori SASAKI,Yoshio HISARI,Toshiyoshi GOTO and Toyoaki MIYAGAWA |
987 |
Controll of Alkali-Silica Expantion by Lithium Ion Pressurized Injection Method |
|
Kazunori ERA, Takafumi MIHARA, Shigeyuki OKADA and Toyoaki MIYAGAWA |
993 |
Influence of Interstitial Phase Composition and Granulated Blast-Furnace Slag on the Adiabatic Temperature Rise of Cement |
|
Eiji MARUYA, Etsuo SAKAI, Seiichi HAGIWARA and Masaki DAIMON |
999 |
Evaluation of Chloride Penetration in Concrete by Resistivity |
|
Keitaro KABECTakafumi SUGIYAMACKenichiro NAKARAI and Yukikazu TSUJI |
1005 |
Behavior of Acoustic Emission of Mortar Degraded by Mixing with Expanded Polystyrene Beads |
|
Kiyohito YAMAMOTO, Akira KOBAYASHI and Shigeyasu AOYAMA |
1011 |
Mechanical Properties and Color of Colored Concrete by Using Waste Earthenware Powder |
|
Masumi INOUE, Kazuhiro HIRAO, Takahisa OKAMOTO and Takayuki KOJIMA |
1019 |
Forecast of Corrosion Initiation Period for Steel in Mortar Using Sacrificial Electrode |
|
Yosuke AZUMA, Shinichi MIYAZATO, Takashi AYATA and Kouzou MUKAI |
1025 |
Hydrogen Permeability of Melt-Spun Ni-Nb-Ta-Zr-Co Amorphous Alloy Membrane and Its Application to Hydrogen Production by Methanol Steam Reforming |
|
Shin-ichi YAMAURA, Hisamichi KIMURA, Akihisa INOUE, Yoichiro SHIMPO, Motonori NISHIDA and Shigeyuki UEMIYA |
1031 |
Identification of Transformation Plasticity Coefficient for Some Steels during Pearlite Transformation and the Dependence on Chemical Composition |
|
Tomohiro TANAKA and Tatsuo INOUE |
1036 |
Numerical Evaluation of Impact Characteristics of Cue in Billiards (Case Where Spin is Given on Ball) |
|
Shinsuke SHIMAMURA, Kazuhiro SUGA, Yoshitaka EZAWA and Shigeru AOKI |
1043 |
Application of Si3N4/SiC Composites for Electrostatic Rotating Paint Atomizer |
|
Katsunori Yamada, Takayuki Kato and Hiroyuki Nakakita |
1049 |
Evaluation of Nano-Sized Nickel Dispersed Alumina Materials |
|
Yoshitaka Nishimura, Kenichiro Aikawa, Seong-Min Choi, Shinobu Hashimoto and Hideo Awaji |
1054 |
Prediction of Warp Deformation for Laminated Body Consisting of the Combination between Viscoelastic Materials by Thermo-Viscoelastic Analysis |
|
Shozo NAKAMURACTakuya KAWABATA and Takaaki TANAKA |
1061 |