Contents57-12

Vol. 57 No. 12 CONTENTS
Special Issue on Fracture Mechanics
General Paper

Special Issue on Fracture Mechanics (Vol.57 No.12)

Foreword
T.Hattori	1185

Original Paper (Vol.57 No.12)

Fatigue Life Evaluation under Seｒvice Loading by Frequency Domain Method

Akito ITO, Naoya NISHIMURA, Toshio HATTORI, Norio TAKEDA and Yasuki KITA
1186

Monte Carlo Simulation of Stress Corrosion Cracking on Smooth Surface under Non-Uniform Stress Condition

Hiromitsu SUZUKI, Keiichiro TOHGO, Yoshinobu SHIMAMURA, Guen NAKAYAMA and Takashi HIRANO
1191

Evaluation of Delamination Life of 8mass%Y₂O₃·ZrO₂/NiCoCrAlY Thermal Barrier Coating under Creep Deformation

Masahiko KATO, Keijiro NAKASA, Baohua ZHAO and Gou TANIGUCHI
1198

Evaluation of Fiber/Matrix Interfacial Fracture Toughness and Its Contribution to Composite Toughness by Using Tow and Four-Fibers Model Composite Specimens

Kozo KOIWA, Hiroshi TANAKA, Chiaki HIWA and Yoshikazu NAKAI
1205

Mechanical Property of Shear Loading for Seismic Isolation Rubber Bearing with Voids

Mitsuo NOTOMI, Haruo SHIMOSAKA, Sigenobu SUZUKI and Toshikazu YOSHIZAWA
1212

General Paper (Vol.57 No.12)

Original Paper (Vol.57 No.12)

Molecular Dynamics Simulations on the Deformation Behavior of Shape Memory Alloy using Multi-Grain Models

Takuya UEHARA Chihiro ASAI and Nobutada OHNO
1217

On a Shear Failure by the Maximum Frictional Shear Stress Criteria Using an Asymptotic Solution for the Drucker-Prager Elastic-Plastic Material

Chikayoshi YATOMI and Taiki SHIMBO
1224

Inclined Fatigue Crack Growth Mechanism from Notch

Chiaki IHARA and Takeyuki TANAKA
1232

Dynamic Viscoelasticity of Poly(butylene terephthalate) during Isothermal Crystallization

Wataru KINOSHITA, Hisahiko KASHIHARA, Kenji URAYAMA and Toshikazu TAKIGAWA
1236

Design Methodology of Granular Iron Content to CVOCs Contaminated Ground in Consideration of Mixture Heterogeneity and Field Application

Keijiro ITO, Junichi KAWAVATA and Masashi KAMON
1240

Combustion Synthesis and Sintering of β-Sialon Ceramics (z=2)

Mohamed SHAHIEN, Mohamed RADWAN, Soshu KIRIHARA, Yoshinari MIYAMOTO and Toshitaka SAKURAI
1248

Relationship of Mechanical Properties between Neat PP/SEBS Blends and Syntactic PP/SEBS Foams with Polymer Microballoons

Hiroyuki MAE
1253

Lecture (Vol.57 No.12)

Basics of Powder Compaction and Material Processing Ⅱ：Powder Forming Process for Microstructure Control

Katsuyoshi KONDOH
1261

Fatigue Life Evaluation under Seｒvice Loading by Frequency Domain Method
Akito ITO, Naoya NISHIMURA, Toshio HATTORI, Norio TAKEDA and Yasuki KITA	1186
Monte Carlo Simulation of Stress Corrosion Cracking on Smooth Surface under Non-Uniform Stress Condition
Hiromitsu SUZUKI, Keiichiro TOHGO, Yoshinobu SHIMAMURA, Guen NAKAYAMA and Takashi HIRANO	1191
Evaluation of Delamination Life of 8mass%Y₂O₃·ZrO₂/NiCoCrAlY Thermal Barrier Coating under Creep Deformation
Masahiko KATO, Keijiro NAKASA, Baohua ZHAO and Gou TANIGUCHI	1198
Evaluation of Fiber/Matrix Interfacial Fracture Toughness and Its Contribution to Composite Toughness by Using Tow and Four-Fibers Model Composite Specimens
Kozo KOIWA, Hiroshi TANAKA, Chiaki HIWA and Yoshikazu NAKAI	1205
Mechanical Property of Shear Loading for Seismic Isolation Rubber Bearing with Voids
Mitsuo NOTOMI, Haruo SHIMOSAKA, Sigenobu SUZUKI and Toshikazu YOSHIZAWA	1212

Molecular Dynamics Simulations on the Deformation Behavior of Shape Memory Alloy using Multi-Grain Models
Takuya UEHARA Chihiro ASAI and Nobutada OHNO	1217
On a Shear Failure by the Maximum Frictional Shear Stress Criteria Using an Asymptotic Solution for the Drucker-Prager Elastic-Plastic Material
Chikayoshi YATOMI and Taiki SHIMBO	1224
Inclined Fatigue Crack Growth Mechanism from Notch
Chiaki IHARA and Takeyuki TANAKA	1232
Dynamic Viscoelasticity of Poly(butylene terephthalate) during Isothermal Crystallization
Wataru KINOSHITA, Hisahiko KASHIHARA, Kenji URAYAMA and Toshikazu TAKIGAWA	1236
Design Methodology of Granular Iron Content to CVOCs Contaminated Ground in Consideration of Mixture Heterogeneity and Field Application
Keijiro ITO, Junichi KAWAVATA and Masashi KAMON	1240
Combustion Synthesis and Sintering of β-Sialon Ceramics (z=2)
Mohamed SHAHIEN, Mohamed RADWAN, Soshu KIRIHARA, Yoshinari MIYAMOTO and Toshitaka SAKURAI	1248
Relationship of Mechanical Properties between Neat PP/SEBS Blends and Syntactic PP/SEBS Foams with Polymer Microballoons
Hiroyuki MAE	1253

Basics of Powder Compaction and Material Processing Ⅱ：Powder Forming Process for Microstructure Control
Katsuyoshi KONDOH	1261