Aqueous Sheet Forming of Zirconia Using an Emulsion of Urethane Polymer |
 |
Koji INAOKACHaruhisa SHIOMICHirofumi INADA and Masatoshi SATO |
523 |
Sintering of A‚ŒN Granules and Its Properties |
|
Shoichi KUME, Ikuko YAMADA, Koji WATARI, and Kenshi MITSUISHI |
528 |
Gas Permeability of Oxide Ceramics at Ultra-High Temperatures |
|
Tsuneaki MATSUDAIRA, Masashi WADA, Satoshi KITAOKA, Tsutomu ASAI, Yoshikazu MIYACHI and Yukio KAGIYA |
532 |
Thermal Conductivity and Effusivity Measurement of High Thermal Conductive SiC Single Crystal Using Thermal Microscope |
|
Ikuko YAMADA, Shoichi KUME, Koji WATARI, Kimihito HATORI and Genzo MATSUI |
539 |
Effect of Additives on High Temperature Deformation in Cubic Zirconia(Y-CSZ) |
|
Takuma WADA, Takahiro KAKEI, Hiroyuki HORII, Takeshi SHIONO and Yasunori OKAMOTO |
543 |
Internal Friction of Some Ceria Stabilized Zirconia Ceramics |
|
Masakuni Ozawa , Takaya Ito and Kenji Tuchiya |
548 |
Effects of ZrO2 on Crystallization of ZnO-Al2O3-SiO2 Glass |
|
Shinji ENDO, Takashi WAKASUGI and Kohei KADONO |
552 |
2-Point Bending Strength of Glass Fibers |
|
Masato INOUE, Satoshi YOSHIDA, Jun MATSUOKA, Yoshinari KATO and Hiroki YAMAZAKI |
557 |
Effect of Low Temperature Gas Nitriding and Low Temperature Gas Carburizing on High Cycle Fatigue Property in SUS316L |
|
Kiyotaka MASAKI and Yasuo OCHI |
563 |
Creep-Fatigue Properties of Fe-Ni Base Alloy HR6W for Piping in 700Ž USC Power Plants |
|
Yasutaka NOGUCHI, Mitsuo MIYAHARA, Hirokazu OKADA, Masaaki IGARASHI and Kazuhiro OGAWA |
569 |
Bending Fatigue Strength of Surface Modified Stainless Steel with Pitting Damage |
|
Takashi NAOE, Hiroyuki KOGAWA, Takashi WAKUI, Masatoshi FUTAKAWA and Hirotsugu TAKEUCHI |
576 |
Asymmetric Rolling Process Simulations by Using Dynamic Explicit Crystallographic Homogenized Elasto/Viscoplastic Finite Element Method |
|
Yasunori NAKAMURA, Nguyen Ngoc TAM, Hiroyuki KURAMAE, Hidetoshi SAKAMOTO, Hideo MORIMOTO and Eiji NAKAMACHI |
583 |
An Analysis of Geometrical Orientation of Martensite in TRIP Steel by Using Fourier Transformation Image Analysis |
|
Takeshi IWAMOTO and Toshiyuki SAWA |
590 |
Influences of the Interface Roughness and the Bond Coat Spray Method on the Adhesion Strength in an Air Plasma Sprayed Thermal Barrier Coatings |
|
Yasuhiro YAMAZAKI, Toshio KINEBUCHI, Hirotaka FUKANUMA and Naoyuki OHNO |
596 |
Evaluation of Fracture Toughness Distribution and Estimation of Residual Stress in Ceramic-Metal Functionally Graded Materials |
|
Keiichiro Tohgo, Mitsuhisa Iizuka, Hiroyasu Araki and Yoshinobu Shimamura |
603 |
Molecular Structures and Tribological Properties of Sputtered Poly(fluorocarbon) Thin Films |
|
Satoru IWAMORI, Kazuya KEDUKA and Akihiro UEMURA |
611 |
Yield Mode Transition in Amorphous PET |
|
Masayoshi KITAGAWA, Yoshinori YAMADA, Ayumu FUJISAKI and Daisuke SUGANUMA |
617 |
