Vol. 57 No. 7 CONTENTS
Special Issue on
X-ray Study of Mechanical Behavior of Materials
General Paper

Special Issue on X-ray Study of Mechanical Behavior of Materials (Vol.57 No.7)

Foreword

Y.Akiniwa

647

Original Paper (Vol.57 No.7)

The Effect of Static and Fatigue Loading on Residual Stress Induced by Laser Peening

Takahiro SAKAI, Koichi AKITA, Shin-ichi OHYA, Yuji SANO and Toshiyuki SAITO

648

Strain Measurement under Loading in Laser Weld on Austenitic Stainless Steel Using High-Energy Synchrotron Radiation

Keisuke MATSUMOTOCTakahisa SHOBUCYoshiaki AKINIWACTsuyoshi YAGI and Masataka YAMAMOTO

654

Prediction of Residual Stress Distribution in Severe Surface Deformed Steel by Constant Penetration Depth Method

Yoshiaki AKINIWA, Yuka KOJIMA, Hidehiko KIMURA and Keisuke MARUKO

660

Study on Imaging and Strain Mapping in the Vicinity of Internal Crack Tip Using Synchrotron White X-Ray

Jun-ichi SHIBANO, Kentaro KAJIWARA, Kouji KIRIYAMA, Takahisa SHOBU, Kenji SUZUKI, Suguru NISHIMURA, Setsuo MIURA and Michiaki KOBAYASHI

667

Microstructure and Residual Stress of EB-PVD TBCs Grown under Substrate Rotation

Kenji SUZUKI , Takahisa SHOBU, Kunihiko WADA, Hideaki MATSUBARA and Masashi KAWAMURA

674


General Paper (Vol.57 No.7)

Original Paper (Vol.57 No.7)

Multiaxial Plastic Behavior of A2024BE-T6 Aluminum Alloy Subjected to Torsional Prestrain

Takenobu TAKEDA and Masanori MINAZAWA

681

Plastic Deformation of AZ31 Magnesium Alloy under Various Temperature Conditions

Takamasa YOSHIKAWA, Masataka TOKUDA, Tadashi INABA, Hajime IWASAKI, Koichi MACHINO and Naoki DEGUCHI

688

Axial Compression of Axial- and Ring-Stiffened Circular Tubes

Dai-Heng CHEN, Takashi MASUZAWA and Shingo OZAKI

696

Optimizing on Hardening Behavior in Rapidly Solidified Processed Fe-13.5Cr-1.3Mo-0.4C Stainless Steel

Junji IMAI, Tadashi HAMADA, Tokuteru UESUGI, Yorinobu TAKIGAWA and Kenji HIGASHI

704

Development of a Single Impact Riveting Method

KOICHI KAIZUCHIROYUKI KINOSHITA, KANAME TSUTSUI and KIYOHIKO IKEDA

712

Evaluation of Delamination Characteristics of TiN and SiC Sputtered Thin Films by Cyclic Indentation under Load Control

Masahiko KATO Keijiro NAKASA Ming LI and Bo ZHANG

718

Fracture Criteria for Unidirectional Discontinuous Fiber Reinforced Plastics with Side Notches

Keiji OGI, Toshihiro YAMAMOTO, Shigeki YASHIRO and Takahiro WATANABE

725

Tensile and Fatigue Strength of High-Modulus Type Poly-p-Phenylene Benzobisoxazole (PBO) Fiber

Noriyo HORIKAWA, Yukihiro NOMURA, Tooru KITAGAWA, Yoshio HARUYAMA, Akiyoshi SAKAIDA, Takashi IMAMICHI, Shinya SASAKI and Tomonari FUKAYA

732

Basic Study on Chloride Induced Corrosion of Stainless Rebar in Mortar Specimen with Bending Crack

Daishin HANAOKA, Ryutaro NASHIMOTO, Shinichi MIYAZATO, Takashi HABUCHI and Takahiko AMINO

739

Lecture (Vol.57 No.7)

Development in Composites Technology for Reduction of Environmental Load ‡U:Recycle Method for CFRP

Koji YAMAGUCHI and Akihiko KITANO

747