Fungal Resistance Test for Non-Treated and Treated Wood in the Field
Haruko SAKAI
Vol. 58 No. 4 CONTENTS
Special Issue on Wood and Wood-Based Materials
General Paper
Special Issue on Wood and Wood-Based Materials (Vol.58 No.4)
Review paper (Vol.58 No.4)
Fungal Resistance Test for Non-Treated and Treated Wood in the Field |
|
Haruko SAKAI |
271 |
Technical Note (Vol.58 No.4)
Panel Shear Performance of Bearing Wall Made of Diagonal Plywood |
 |
Susumu KAWAMURA, Hiroshi OHATA and Koji MURATA |
280 |
Original Paper (Vol.58 No.4)
Estimation of Drying Stress in a Longitudinally Hollowed Boxed-Heart Lumber Using Finite Element Method |
|
Norihiko YAMADA, Yoshihisa FUJII and Shogo OKUMURA |
286 |
Effect of Hgh Filler Content on Physical Properties for Cellulose-Plastic Composites |
|
Hirokazu ITO, Hidehiro HATTORI, Tadashi OKAMOTO and Masahiro TAKATANI |
292 |
Solution Properties of Cellulose(Algal), Xylan, and Lignin |
|
Daisuke TATSUMI, Mio OKAZAKI, Masumi FUNAYAMA, Kousuke NAKATA, Ichiro MIHARA and Takayoshi MATSUMOTO |
297 |
Moisture Adsorption and Desorption Properties of Pelletized Zeolite and Its Efficacy as a Physical Barrier against Termites |
|
Yoshiyuki YANASE, Kojiro UETANI, Yoshihisa FUJII and Shogo OKUMURA |
304 |
Technical Note (Vol.58 No.4)
A Practical Use of Simplified Fatigue Life Prediction Method at Stress Concentration of Metals |
|
Yoichi TAMIYA and Takuma WADA |
311 |
Original Paper (Vol.58 No.4)
Strength and Formability of Friction Stir Welded Aluminum Alloy with Cold Rolled Steel |
|
Tatsuro MORITA, Akira SAKAMOTO, Shinta MABUCHI and Takashi IIZUKA |
317 |
Temperature Estimation Based on Microstructural Change of Coatings for a Gas Turbine -Influence of Deposition Process on Microstructural Change and Estimated Temperature- |
|
Mitsutoshi OKADA, Tohru HISAMATSU, Terutaka FUJIOKA and Takayuki KITAMURA |
323 |
Experimental Study on Flexural Capacity of RC Beams with Cross-Section Patching Repair and Strengthening by CFRP Sheet |
|
Feng PENG, Hidenori MORIKAWA and Shuichi NONAKA |
331 |
Study on Static and Dynamic Contact Strength of Ceramic Bearing Ball |
|
Manabu TAKAHASHI, Shinya KAJIKAWA, Shinya MATSUDA, Keiji OGI and Nagatoshi OKABE |
338 |
Factors Determining Selection of Exterior Wall Finishing Materials and Similarity Determined by Degree of Agreement between Principal Central Business Districts in Japan |
|
Takabumi TAWATA and Hiroshi IWASAKI |
345 |
Lecture (Vol.58 No.4)
Basics of Powder Compaction and Material Processing ‡YFNew Powder Coordination and Control of Sintered Shape and Structure |
|
Kazunari SHINAGAWA |
353 |
