Contents61-5

Vol. 61 No. 5 CONTENTS
Special Issue on Processing and Properties of Materials under Extreme Environment
Special Issue on Composite Materials

Special Issue on Processing and Properties of Materials under Extreme Environment (Vol.61 No.5)

Original Paper (Vol.61 No.5)

Observation of Superconductivity at Very High Pressure and Low Temperature -Pressure-Induced High Temperature Superconductivity of Calcium-

Katsuya SHIMIZU
399

Superconductivity and Quantum Criticality in Fe_1+δSe_xTe_1-x

Chishiro MICHIOKA and Kazuyoshi YOSHIMURA
402

HIP Production of Diamond-SiC Composite and Its Application to High-Pressure In-Situ X-Ray Experiments

Osamu OHTAKA, Ken-ichi FUNAKOSHI and Masaru SHIMONO
407

Synthesis of Super-Hard Materials by Direct Conversion Sintering under High Pressure and High Temperature and Their Mechanical Properties

Hitoshi SUMIYA
412

Fabrication of High-Strength & -Fracture Toughness ZrO₂/25mol%Al₂O₃ Composite Ceramics Using High-Pressure (1GPa) Sintering

Ken HIROTA, Hideyuki SATO, Katsuya TAKAOKA, Masaki KATO and Hideki TAGUCHI
419

Special Issue on Composite Materials (Vol.61 No.5)

Foreword
K.Goda	427

Original Paper (Vol.61 No.5)

Study on the Strength Reduction in Composite Structures due to Process-Induced Deformation

Takayuki SHIMIZU, Hiroki KOINUMA and Kanehiro NAGAI
428

Numerical Analysis of Damage Development for Woven Fabric Composite under Off-Axis Loading

Yuzo FUJITA and Tetsusei KURASHIKI
434

Relationship between the Effect of the Modification and the Damage Behavior of Resin/Fiber Interface in Glass Fiber Reinforced Polycarbonate

Makoto ANDO, Manabu NOMURA, Hidetoshi TAKEDA, Yoshihito KUROSHIMA and Yasuhiro NAKATSUKA
441

Thermoelastic Characterization and Quantitative Evaluation of Fatigue Induced Damages in Carbon Fiber/NY6 Composites

Toshiyuki UENOYA, Ryuta SUZUKI and Hiroyuki MIYAMOTO
447

An In-Situ CVD Coating of Aluminum on VGCF for the Fabrication of Al-VGCF Composites

Fumio OGAWA, Kazuya HIRAKAWA and Chitoshi MASUDA
454

Comparison of the Mechanical Property at High Temperatures of C/C Composites Fabricated from PAN- and Pitch-Based Carbon Fibers

Norio IWASHITA, Hiroshi YAMAUCHI and Shigeru SUZUKI
462

Improvement of Bending Strength and Fracture Toughness of C/C Composite by Adding Carbon Particles with 3-Dimensional Web-Like Structures

Kiyotaka OBUNAI, Kazuya OKUBO and Toru FUJII
468

Lecture (Vol.61 No.5)

Historical Background, Attainment and Future Prospects of JSMS Databases on Fatigue Strength of Metallic Materials Ⅲ:Establishment and Diffusion of JSMS Standard Regression Method of S-N　Curves

Tatsuo SAKAI, Hidetoshi NAKAYASU, Toshinori YOKOMAKU, Atsushi SUGETA, Izuru NISHIKAWA, Satoshi HANAKI and Kenji OKADA
475

Observation of Superconductivity at Very High Pressure and Low Temperature -Pressure-Induced High Temperature Superconductivity of Calcium-
Katsuya SHIMIZU	399
Superconductivity and Quantum Criticality in Fe_1+δSe_xTe_1-x
Chishiro MICHIOKA and Kazuyoshi YOSHIMURA	402
HIP Production of Diamond-SiC Composite and Its Application to High-Pressure In-Situ X-Ray Experiments
Osamu OHTAKA, Ken-ichi FUNAKOSHI and Masaru SHIMONO	407
Synthesis of Super-Hard Materials by Direct Conversion Sintering under High Pressure and High Temperature and Their Mechanical Properties
Hitoshi SUMIYA	412
Fabrication of High-Strength & -Fracture Toughness ZrO₂/25mol%Al₂O₃ Composite Ceramics Using High-Pressure (1GPa) Sintering
Ken HIROTA, Hideyuki SATO, Katsuya TAKAOKA, Masaki KATO and Hideki TAGUCHI	419

Study on the Strength Reduction in Composite Structures due to Process-Induced Deformation
Takayuki SHIMIZU, Hiroki KOINUMA and Kanehiro NAGAI	428
Numerical Analysis of Damage Development for Woven Fabric Composite under Off-Axis Loading
Yuzo FUJITA and Tetsusei KURASHIKI	434
Relationship between the Effect of the Modification and the Damage Behavior of Resin/Fiber Interface in Glass Fiber Reinforced Polycarbonate
Makoto ANDO, Manabu NOMURA, Hidetoshi TAKEDA, Yoshihito KUROSHIMA and Yasuhiro NAKATSUKA	441
Thermoelastic Characterization and Quantitative Evaluation of Fatigue Induced Damages in Carbon Fiber/NY6 Composites
Toshiyuki UENOYA, Ryuta SUZUKI and Hiroyuki MIYAMOTO	447
An In-Situ CVD Coating of Aluminum on VGCF for the Fabrication of Al-VGCF Composites
Fumio OGAWA, Kazuya HIRAKAWA and Chitoshi MASUDA	454
Comparison of the Mechanical Property at High Temperatures of C/C Composites Fabricated from PAN- and Pitch-Based Carbon Fibers
Norio IWASHITA, Hiroshi YAMAUCHI and Shigeru SUZUKI	462
Improvement of Bending Strength and Fracture Toughness of C/C Composite by Adding Carbon Particles with 3-Dimensional Web-Like Structures
Kiyotaka OBUNAI, Kazuya OKUBO and Toru FUJII	468

Historical Background, Attainment and Future Prospects of JSMS Databases on Fatigue Strength of Metallic Materials Ⅲ:Establishment and Diffusion of JSMS Standard Regression Method of S-N　Curves
Tatsuo SAKAI, Hidetoshi NAKAYASU, Toshinori YOKOMAKU, Atsushi SUGETA, Izuru NISHIKAWA, Satoshi HANAKI and Kenji OKADA	475