Contents62-1

Vol. 62 No. 1 CONTENTS
Special Issue on Polymeric Materials
General Paper

Special Issue on Polymeric Materials (Vol.62 No.1)

Original Paper (Vol.62 No.1)

A Study of Mechanical Properties and Morphological Change of Polypropylene/Polyamide with Addition of PP-g-MAH through Reactive Processing Method

Shigeya NAKAMURA, Kazuki OKA, Katsuhisa TOKUMITSU, Yoshihiro YAMASHITA, Kenji KIKUCHI and Takeshi KANAZAWA
1

On-Line Wide-Angle X-Ray Scattering Measurements During High-Speed Melt-Spinning of Poly (Ethylene Terephthalate) Fiber

Hirokazu NISHIMURA, Masaki SEI, Kenji CHIZUKA, Masato MASUDA, Hitoshi YAMAZAKI, Junichi KOJIMA, Katsuhiro YAMAMOTO, Shigeru OKAMOTO, Katsuhiko NAKAMAE, Masaru KOTERA, Takeshi KIKUTANI and Shinichi SAKURAI
8

Gold Nanopaticle/PDMS Composite Exhibiting Anisotropic Plasmon Resonance

Masatoshi TOSAKA and Kazunobu SENOO
13

Strain Energy Function of Poly(Propylene Oxide) and Polybutadiene Elastomers Estimated by General Biaxial Strain Testing

Shun SHIMIZU, Jungju LEE, Kenji URAYAMA and Toshikazu TAKIGAWA
18

Effect of Crosslink Density on Nonlinear Stress-Strain Behavior of Epoxy Glasses Subjected to Large Deformation

Shin’ya YOSHIOKA and Yuichiro YOKOYAMA
22

General Paper (Vol.62 No.1)

Original Paper (Vol.62 No.1)

Fracture of Notched GF/PP Plates in Dynamic Tensile Strength Test

Toshihiro YAMAMOTO, Hidetoshi TAKEDA, Shohei MORIYAMA and Takashi HIYOSHI
27

Reduction of Stress Concentration at Edge of Stop Hole by Closing Crack Surface

Toshiyuki ISHIKAWA, Risa MATSUMOTO, Atsushi HATTORI, Hirotaka KAWANO and Kentaro YAMADA
33

Measurement and Evaluation of Elastic Shear Modulus of Sandy Geomaterial

Shunzo KAWAJIRI, Takayuki KAWAGUCHI and Satoru SHIBUYA
39

Methods of Evaluating One-Sided Tolerance Limit (A- and B-Basis Values) of Combined Sample Sets

Atsushi TAKANO, Hirotsugu MORINAGA and Toshio INOUE
45

Lecture (Vol.62 No.1)

The Frontier of Technology Development in Remaining Life Assessment for High Temperature Components Ⅲ:Remaining Life Assessment Based on Onsite Strain Measurement in High Temperature Components

Isamu NONAKA
50

A Study of Mechanical Properties and Morphological Change of Polypropylene/Polyamide with Addition of PP-g-MAH through Reactive Processing Method
Shigeya NAKAMURA, Kazuki OKA, Katsuhisa TOKUMITSU, Yoshihiro YAMASHITA, Kenji KIKUCHI and Takeshi KANAZAWA	1
On-Line Wide-Angle X-Ray Scattering Measurements During High-Speed Melt-Spinning of Poly (Ethylene Terephthalate) Fiber
Hirokazu NISHIMURA, Masaki SEI, Kenji CHIZUKA, Masato MASUDA, Hitoshi YAMAZAKI, Junichi KOJIMA, Katsuhiro YAMAMOTO, Shigeru OKAMOTO, Katsuhiko NAKAMAE, Masaru KOTERA, Takeshi KIKUTANI and Shinichi SAKURAI	8
Gold Nanopaticle/PDMS Composite Exhibiting Anisotropic Plasmon Resonance
Masatoshi TOSAKA and Kazunobu SENOO	13
Strain Energy Function of Poly(Propylene Oxide) and Polybutadiene Elastomers Estimated by General Biaxial Strain Testing
Shun SHIMIZU, Jungju LEE, Kenji URAYAMA and Toshikazu TAKIGAWA	18
Effect of Crosslink Density on Nonlinear Stress-Strain Behavior of Epoxy Glasses Subjected to Large Deformation
Shin’ya YOSHIOKA and Yuichiro YOKOYAMA	22

Fracture of Notched GF/PP Plates in Dynamic Tensile Strength Test
Toshihiro YAMAMOTO, Hidetoshi TAKEDA, Shohei MORIYAMA and Takashi HIYOSHI	27
Reduction of Stress Concentration at Edge of Stop Hole by Closing Crack Surface
Toshiyuki ISHIKAWA, Risa MATSUMOTO, Atsushi HATTORI, Hirotaka KAWANO and Kentaro YAMADA	33
Measurement and Evaluation of Elastic Shear Modulus of Sandy Geomaterial
Shunzo KAWAJIRI, Takayuki KAWAGUCHI and Satoru SHIBUYA	39
Methods of Evaluating One-Sided Tolerance Limit (A- and B-Basis Values) of Combined Sample Sets
Atsushi TAKANO, Hirotsugu MORINAGA and Toshio INOUE	45

The Frontier of Technology Development in Remaining Life Assessment for High Temperature Components Ⅲ:Remaining Life Assessment Based on Onsite Strain Measurement in High Temperature Components
Isamu NONAKA	50