Original Paper (Vol.62 No.2)

Evolutions of Nonlinear Acoustic Characterizations and Microstructural Change during Creep in Cr-Mo-V Steel
Toshihiro OHTANI, Yuuki KUSANAGI and Yutaka ISHII	60
Characterization of Creep Crack Growth Rate at the Early Stage and Estimation of Creep Crack Initiation Life for High Cr Steels and Their Weldments
Ryuji SUGIURA, Toshimitsu YOKOBORI, Kazuto SATO, Masaaki TABUCHI, Kenichi KOBAYASHI, Masataka YATOMI and Kamran NIKBIN	68
Microstructural Changes and Type-‡W Damage Evolutions during Creep in High Cr Steel Welds
Hiromichi HONGO, Masaaki TABUCHI, Yuan LIU and Susumu TSUKAMOTO	75
Microscopic Simulation and Life Prediction of High Cr Steel Welds Subject to Type IV Creep Damage
Takuya FUKAHORI, Takumi TOKIYOSHI, Toshihide IGARI, Yasuharu CHUMAN, Masaaki FUJITA and Fumiko KAWASHIMA	82
Type‡W Damage Evaluation of Low Alloy Steel Weld Joint by Small Punch Creep Testing
Tomoya NISHIOKA, Hiromi UEMURA, Kazunari FUJIYAMA, Yoshiatsu SAWARAGI	88
Small Crack Propagation Behavior of 316FR Stainless Steel under Thermo-Mechanical Fatigue Conditions
Yasuhiro YAMAZAKI, Wataru FUJIKI, Osamu ABE and Yutaro HARA	93
Stepwise S-N Curve and Internal Fracture of Austenitic Stainless Steel under High Temperature and High Cycle Fatigue Conditions
Yukio TAKAHASHI, Maya KOBAYASHI and Kenji KANAZAWA	99
High Cycle Fatigue Properties of Mod.9Cr-1Mo Steel at Elevated Temperatures
Isamu NONAKA, Junpei NEMOTO, Yuji ICHIKAWA and Hideo MIURA	105
Evaluation of Multiaxial Low Cycle Fatigue Strength for Mod.9Cr-1Mo Steel under Non-Proportional Loading
Takamoto ITOH, Kenichi FUKUMOTO, Hideki HAGI, Akira ITOH and Daichi SAITOH	110
Definition of Stress and Strain Ranges for Multiaxial Fatigue Life Evaluation under Non-Proportional Loading
Takamoto ITOH, Masao SAKANE and Yuuta SHIMIZU	117
Influence of a Thermal Barrier Coating on the High Temperature Low Cycle Fatigue of the Substrate
Hiroyuki WAKI, Akira KOBAYASHI and Noriaki ISHII	125
Thermally Grown Oxide Growth Behavior and Its Impedance Properties of Thermal Barrier Coatings with Cold Sprayed and Low Pressure Plasma Sprayed Bond Coatings
Kazuhiro OGAWA and Atsushi NAKANO	131
Optimization of Post Spray Heat Treatments for Cold Sprayed Ni Base Superalloy IN738LC
Kazuhiro OGAWA and Satoshi ONCHI	137
Development of a New Material Test System in a Simulated Gas Turbine Combustion Atmosphere
Satoshi YAMAGISHI, Masakazu OKAZAKI, Rajivgandhi SUBRAMANIAN, Ryohei NOMURA and Hirotaka FUKANUMA	143
Tensile Properties and Viscoelastic Model of a Polyimide Thin Film
Shengde ZHANG, Syuhei MORI, Tadashi NAGASAWA, Kaoru KOBAYASHI and Masao SAKANE	149

Lecture (Vol.62 No.2)

The Frontier of Technology Development in Remaining Life Assessment for High Temperature Components ‡W:Technology Development in Remaining-Life Assessment with Electromagnetic Acoustic Resonance
Toshihiro OHTANI	157