Effect of Hydrogen Trapped by Inclusions on Ultra-Long Life Fatigue Failure of Bearing Steel
Yukitaka MURAKAMI, Naoko Nancy YOKOYAMA and Kenichi TAKAI
Abstract:The mechanism for fatigue failure in extremely high cycle fatigue in the regime of N>107 is studied on a bearing steel, JIS SUJ2. Special focus was given to the fracture morphology in the vicinity of fracture origin (subsurface nonmetallic inclusion) of a heat treated bearing steel (Specimen QT). The particular morphology looks dark during optical microscopic observation. Specimens with short fatigue life of the order of Nf=105 did not have such a dark area, ODA (optically dark area). To investigate the influence of the hydrogen trapped by nonmetallic inclusions on fatigue properties, specimens heat treated in a vacuum followed by quenching and tempering (Specimen VQ) were prepared. Specimens VQ contained 0.07ppm hydrogen as compared to 0.80ppm hydrogen for conventional Specimens QT. Specimens VQ had a slightly smaller ODA than Specimens QT. Hydrogen was detected by a Secondary Ion Mass Spectrometer around the inclusion at fracture origin of Specimens QT and Specimens VQ. Thus, it can be concluded that the formation of ODA is closely related to hydrogen trapped by nonmetallic inclusions. Estimations of fatigue limit by the parameter model based on the original size of inclusions for fatigue limit defined for 107 cycles are ~10% unconservative. Considering the size of ODA into fatigue limit estimation, the parameter model can predict the mechanical fatigue threshold for small cracks without influence of hydrogen. The mechanism of duplex S-N curve is also discussed. Key Words:Ultra-long fatigue failure, Inclusion, Bearing steel, parameter model , Hydrogen, Optically Dark Area (ODA)