A Trial to Prevent the Inpreferable Effect of Local Cellular Fomation in Microstructurally-Controlled Ni-Base Superalloys Subjected to Previous Damage on High Temperature Fatigue Strength -For Refurbishment and Recoating Technology-
Masakazu Okazaki, Reki Takaku, Toshio Suzuki, Kouichi Namba and Yoshio Harada
Abstract:In order to explore a refurbishment technology for advanced gas turbine components, the cellular formation in microstructurally-controlled Ni-based superalloys, CMSX-4 and CM247LC, have been studied. The cellular formation can be seen accompanied with a g/g' microstructure coarsened in lamellar or equiaxed arrays, when the superalloys are previously subjected to a damage associated with local plastic deformation, followed by re-heat treatment. During this study special attention was paid to the effect of the cellular formation on the high cycle fatigue strength at high temperature. The experiments indicated that once the cellular formation was reached, the fatigue strength was remarkably reduced, compared with the healthy, or virgin material. The methods to reduce and prevent the above unfavorable effect have been explored. It was strongly suggested by the fatigue tests that the addition of grain boundary strengthening elements would be a promising technique. The application of the surface modification technique, or protective coating, might be also a useful technique. Moreover, nondestructive detection of the cellular formation was also studied, employing ultrasonic technique. Key Words:Refurbishment and recoating technology, Microstructurally-controlled Ni-base superalloys, CMSX-4, CM247LC, Cellular formation, Fatigue strength, Grain boundary strengthening elements, Nondestructive detection