Properties of classified fly ashes by using of electrostatic precipitator and the modification of fly ashes by the removal of carbon |
|
Seung Heun Lee; Etsuo Sakai; Kenzo Watanabe; Taichi Yanagisawa; Masaki Daimon |
837 |
Effect of the quality and replacing ratio of fly ash on the property of self-compacting concrete |
|
Yoshitaka Mitsuiwa; Kazuo Togawa; Junji Nakamoto |
843 |
Expansion property and development of strength of mortar added with expansive additives with many kinds of compositions and particle sizes |
|
Minoru Morioka; Hirotoshi Hagiwara; Etsuo Sakai; Masaki Daimon |
848 |
Influences of types of cement and redispersible polymer powder on properties of polymer-modified mortars |
|
Akio Sugiura; Hiroyuki Sakakibara; Shigehiro Kobayashi |
853 |
Study on influence of aggregate particle on rheological property of fresh concrete |
|
Naoki Mishima; Yasuo Tanigawa; Hiroshi Mori; Yoshiyuki Kurokawa; Ken-ichi Terada; Toshinori Hattori |
858 |
Analytical study on deformation behavior of concrete under repetitive compressive loading |
|
Takashi Hiraiwa; Kousuke Kawato; Hiroshi Mori; Yasuo Tanigawa |
864 |
Impact-echo technique for grouting performance in post-tensioning duct |
|
Takeshi Wanatabe; Masayasu Ohtsu; Yuichi Tomoda |
870 |
Assessment of diffusion coefficient of chloride ion in mortar made of several binder by electro-migration method |
|
Nobuaki Otsuki; Makoto Hisada; Shinichi Miyazato; Hiroshi Minagawa |
876 |
Steel corrosion in concrete with ground granulated blast furnace slag |
|
Koichi Kobayashi; Shiro Nakamura; Atsushi Hattori; Toyoaki Miyagawa |
882 |
Deterioration of concrete using artificial lightweight aggregate under freezing and thawing conditions |
|
Hiroaki Mori; Yuko Ishikawa; Tatsumasa Shibata; Takahisa Okamoto |
889 |
Effects of various factors on ASR expansion in mortar treated by autoclave |
|
Tamotsu Kuroda; Shinzo Nishibayashi; Shoichi Inoue; Akira Yoshino |
895 |
Influence of desalination with lithium solution on expansion of concrete due to alkali aggregate reaction |
|
Masanobu Ashida; Takao Ueda; Toyoaki Miyagawa |
901 |
Corrosion protection behavior of reinforcing steel after desalination on concrete structure |
|
Takao Ueda; Masanobu Ashida; Toyoaki Miyagawa |
907 |
Basic study on the repaired effects of damaged R/C square columns |
|
Ikuo Hirasawa; Nobuhiko Suzuki; Noriko Hara; Yoshiyuki Akiyama |
913 |
Prediction of strength distribution of deteriorated concrete members and shear strength evaluation |
|
Hidenori Morikawa; Suguru Kawai |
919 |
Evaluation of bond behavior of beam reinforcement before yielding passing through reinforced concrete interior beam-column joint |
|
Masaru Teraoka; Satoshi Sasaki; Kazuya Hayashi |
927 |
High temperature creep under bend loading in Si-Ti-C-O ceramic fiber bonded body |
|
Sen Zhao; Kenji Hatanaka; Shinji Kajii; Toshihiro Ishikawa |
935 |
Effect of loading path on fatigue degradation and stress-strain response of glass fabric composites under tension/torsion biaxial cyclic loading |
|
Hiroshi Kawakami; Minoru Tamiaki; Toru Fujii |
943 |
Fatigue and creep properties and crack growth behavior of solder joint under shear stress |
|
Tsuneshichi Tanaka; Hideaki Nakayama; Yukiyoshi Kobayashi; Takahiro Kawabe |
950 |
Estimation of tensile modulus for carbon fiber with diameter varying along fiber |
|
Noriyo Horikawa; Hideaki Nakayama; Akiyoshi Sakaida; Tsuneshichi Tanaka |
956 |