Variation of Dynamic Viscoelasticity in Glassy Polymethyl Methacrylate Being Uniaxially Stretched by Creep Stress and Constant Rate Tension |
|
Shin'ya YOSHIOKA, Hiroyuki TACHIBANA and Yukuo NANZAI |
1257 |
Structural Development of PEN/PET Blend Film during Drawing at High Temperature |
|
Syozo MURAKAMI, Elinor L. BEDIA and Shinzo KOHJIYA@ |
1263 |
Analysis of Interfacial Delamination for Plastic Film |Basic Study for Mechanism of Void Formation in Stretched PET Film having Incompatible Polymer Particles| |
|
Katsuya ITO, Chisato NONOMURA, Toshitake SUZUKI,
and Hideaki ISHIHARA |
1270 |
An Experimental Approach to the Optimum Strength of Uniaxially Thermoformed Polyvinyi-chioride(PVC)Sheet |
|
Akihisa TSUKAMOTO and Yukuo NANZAI |
1276 |
Photopolymerization of Vinylester Resin Having Hydroxymethyl Group |
|
Keiko OHTSUKA, Kiichi HASEGAWA, Akihiro MATSUMOT Hajime KIMURA, Akinori FUKUDA
Mizuho YOSHIMOTO and Hideki FUJIWARA |
1282 |
Examination of Condition for Fine Structure of Immiscible Polymer Blends by Step Change of Shear Rate |
|
Yoshiaki TAKAHASHI, Masanao SUZUKI and Ichiro NODA |
1286 |
Viscoelasticity and Morphology of Soft Polycarbonate as a Substitute for Poly(vinyl Chloride) |
|
Tadashi INOUE*, Kunihiro OSAKI*,
Hironobu MORISHITA, Hiroyuki TAMURA, and Shuji SAKAMOTO |
1291 |
Sub-Relaxation of Bisphenol A Polycarbonate Studied with Dynamic Birefringence |
|
Tadashi INOUE, Kunihiro OSAKI, Hironobu MORISHITA, Hiroyuki TAMURA, and Shuji SAKAMOTO |
1298 |
Wear Properties and Mechanical Properties of Slightly Cross-linked Ultra-high Molecular Weight Polyethylene crystallized under Uniaxial Compression |
|
Makoto OHTA, Suong-Hyu HYON, Yu-Bong KANG, Masanori OKA, Sadami TSUTSUMI, Syozo MURAKAMI, and Shinzo KOHJIYA |
1301 |
Ultra-Fine Grain Refinement and Tensile Properties of Titanium Alloys Obtained through Protium Treatment |
|
Jun Nakahigashi and Hirofumi Yoshimura |
1307 |
Buckling Strength of Composite Laminated Curved Plates under Compressive Load |
|
Masafumi YAMAMOTO and Hirakazu KASUYA |
1312 |
Venation Pattern of Butterbur Leaf and Its Mechanical Contribution |
|
Hidetoshi KOBAYASHI, Masashi DAIMARUYA and Kaori KURIBAYASHI |
1318 |
Measurement of Fracture Toughness for Brittle Materials under Mixed-Mode Impact Loading Using Center-Notched Disk Specimen |
|
Yoshiaki YAMAUCHI, Motohiro NAKANO, Keizo KISHIDA and Tatsuya OKABE |
1324 |
Influence of Laves Phase Precipitation on Material Degration of W Alloyed 9%Cr Ferritic Steel During Creep |
|
Shin-ichi KOMAZAKI, Shigeo KISHI, Tetsuo SHOJI, Kojiro HIGUCHI and Koshi
SUZUKI |
1330 |
Optimization of Testing Conditions for Mixed Gas Corrosion Testing of Electrical Contacts |
|
Rintaro MINAMITANI, Toshio HATSUDA and Akio YASUKAWA |
1338 |