Analysis of the Surface Structure of Cellulose Fibers Using Atomic Force Microscopy and Small-Angle X-Ray Scattering |
 |
Daisuke TATSUMI, Yoshihiro TAINOSHO and Takayoshi MATSUMOTO |
1295 |
Formation of the Silicate Layers on the Nylon 6 Film by Sol-Gel Method |
|
Tadakazu TSUKAMOTO, Motoo KAWASAKI and Hideki YAMANE |
1299 |
The Effect of Aging on the Mechanical Strength of Polyvinyl-Chloride(PVC) Sheet Thermoformed by Uniaxial Stretching |
|
Akihisa TSUKAMOTO, Hirotaka ARITA and Yukuo NANZAI |
1306 |
Toughening of Epoxy Resin through Mechanical and Thermal Treatments |
|
Hiroshi KAWAKAMI, Toshiaki OOZU and Yukuo NANZAI |
1311 |
Study on Polycarbonate as an Actively Protective Material and Reaction Mechanism of tne Molecular Weight Repairing |
|
Yasuyuki IKEDA, Kimio IMAIZUMI, Tomohiro OHKAWA, Haruo UNNO and Kunihiko TAKEDA |
1316 |
Fabrication and Mechanical Properties of Unidirectional PE/PE Composites |
|
Tatsuro FUKUI, Tetsuya TSUJII, Asami NAKAI and Hiroyuki HAMADA |
1323 |
Design of Vinyle-Ester Resin Composite with Affordable Interphase |
|
Yoshimichi FUJII, Masahiro YAMANOUCHI, Machiko MIZOGUCHI and Hiroyuki HAMADA |
1329 |
Characterization of Cross-Linked Polystyrenes by Pyrolysis-Gas Chromatography and Comparison with those by Dynamic Mechanical Analysis and Swelling Measurement |
|
Keishi OBA, Noriyuki KURITA, Yutaka KAYAMORI, Yuji TAJIMA, Yoshiaki TAKAHASHI, Ichiro NODA, Yasuyuki ISHIDA, Hajime OHTANI and Shin TSUGE |
1335 |
Propagation Behavior of the Stress Waves on the Strip with a Inclined Notch |
|
Kazufumi UDA, Ichiro MAEKAWA and Yasushige KASHIWABARA |
1345 |
Size Effects of Fracture Toughness and Dependence of Microstructure in Ti-Alloys |
|
Seiji KANAMORI, Eiji ABE, Tetsuya TAGAWA and Takashi MIYATA |
1352 |
Study of Dynamic Branching Fracture by Numerical Simulation |
|
Toshihisa NISHIOKA, Stanislav TCHOUIKOV and Takehiro FUJIMOTO |
1359 |
A Study of Interface Fracture Criteria by Using Cohesive Force Model |
|
Masaki OMIYA and Kikuo KISHIMOTO |
1367 |
A Numerical and Theoretical Study on Relationship between Stress Intensity Factor of a Small Edge Crack on Interface and Free-Edge Stress Singularity of Bonded Dissimilar Materials |
|
Seiji IOKA, Takashi MATSUDA and Shiro KUBO |
1373 |
Study on X-Ray Parameter ƒÖy and Fracture Mechanics Parameter Kmax in Cyclic Hardening Steel |
|
Chiaki TSUBOUCHI and Takeshi HORIKAWA |
1380 |
The Influence of Thickness of Specimen on Fatigue Crack Propagation Properties in Spherical Graphite Cast Iron |
|
Hyoe USAMI, Yoshihiro SUGIYAMA, Naoto SHIRAKI and Tsutomu UMEHARA |
1386 |
Preparation and Evaluation of Fracture Resistance for Glass-Ceramic/Metal Composites |
|
Mitsuhiro TOYODA, Takeshi SHIONO and Toshihiko NISHIDA |
1392 |
Effect of Frequency on Fatigue Behavior in 3D-Woven Tyranno Fiber Reinforced SiC Composites |
|
Shijie ZHU, Yohei KANEKO, Yasuo OCHI, Toshio OGASAWARA and Takashi ISHIKAWA |
1400 |
Effect of Long Term Thermal Aging on Mechanical Properties of Gas Turbine Blade Coatings |
|
Akihiro ITO, Yuji SUGITA, Shigeo SAKURAI and Jun KAMEDA |
1405 |
Fatigue Behaviour of 6063 Aluminium Alloy in Corrosive Environments |
|
Keiro TOKAJI and Yoji GOSHIMA |
1411 |
High Temperature Fatigue Deformation Behavior of Ceramics Thermally Sprayed SUS304 Steel Measured with an ESPI System |
|
Mitsuo KIDO, Rongguang WANG, Syouzou NAKAMURA, Mutsumi TAKEDA, Masahiro YAMAZAKI and Tarou TOKUDA |
1417 |
The Detection of Internal Fatigue Crack Using X-Ray Stress Measurement |
|
Shin-ichi OHYA,Yasufumi AKIMOTO, Yoriko OHMURA and Yoshihiko HAGIWARA |
1423 |
A Constant Incidence Angle Method to Estimate the Subsurface Distribution of Residual Stress by High-Energy X-Rays from Synchrotron Radiation Source |
|
Etsuya YANASE, Kouji NISHIO, Yukihiro KUSUMI, Kazuo ARAI, Yoshiaki AKINIWA and Keisuke TANAKA |
1429 |
