Wood Properties of Cryptomeria Japonica in Southern Kyusyu ‡U -Characteristics of Obi-Sugi Cultivars- |
 |
Yoshio KIJIDANI and Ryushi KITAHARA |
336 |
Tensile Strength Properties of Glued Laminated Wood and Laminated Veneer Lumber with Butt-Joints |
|
Tomoyuki HAYASHI and Atsushi MIYATAKE |
341 |
Analysis of Strain Distribution of Softwood in Transverse Compression Measured by Digital Image Correlation Method |
|
Koji MURATA and Minoru MASUDA |
347 |
The Mechanical Properties of Bamboo Fibers Prepared by Steam-Explosion Method |
|
Hitoshi TAKAGI, Ryuki TAKURA, Yohei ICHIHARA, Shinji OCHI, Hiroaki MISAWA and Ryusuke NIKI |
353 |
The Manufacture and Mechanical Properties of Composite Boards Made from Starch-Based Biodegradable Plastic and Bamboo Powder |
|
Hitoshi TAKAGI and Ryuki TAKURA |
357 |
Dielectric Relaxation of Heat-Treated Wood |
|
Hiroyuki SUGIMOTO and Misato NORIMOTO |
362 |
Gas Permeability in Wood of Cryptomeria japonica D. Don -Gas Permeability between White Zone Wood, Sapwood and Ambient Atmosphere in the Radial Direction in Green Logs- |
|
Satoshi NAGAI and Yoshiaki TANIGUCHI |
368 |
Influence of Heat Treatment on Size of Softwood-Particles |
|
Hiroyuki IKEGIWA , Tatsujiro AKAI and Shigetoshi HARIMA |
374 |
Localized Instability Propagation Behavior of Polymer under Shearing -Formation and Growth of Surface Microstructure in Polycarbonate |
|
Yoshio KOUTA, Taiji ADACHI and Yoshihiro TOMITA |
379 |
Quasi Three-Dimensional Analysis of Poroelastic Medium with Multi-Layered Circular Inclusions |
|
Akio ICHIKAWA, Hiroshi ENDO, Ken-ichi HIRASHIMA and Toshio HAGIHARA |
386 |
Time and Temperature Dependence of Recovery Behavior of Residual Strains in Largely Deformed Glassy Poly(Methyl Methacrylate) |
|
Shin'ya YOSHIOKA, Ryoji NAKAGAWA and Yukuo NANZAI |
394 |
Fundamental Solutions for a Cylindrically Anisotropic Elastic Medium |
|
Takehiko NAKAYAMA, Ken-ichi HIRASHIMA, Takuo SUZUK and Noboru YOSHINO |
400 |
Fracture Behavior of a Glass Fiber Reinforced Phenolic Resin Composite |
|
Keiji OGI, Tetsuro SHIRAISHI and Hidemi YAZAWA |
407 |
Cure Monitoring for Heat-Resistant Tough Epoxy Resin Matrix CFRP |
|
Masaaki JINNO, Shigeru SAKAI, Katsuhiko OSAKA and Takehito FUKUDA |
413 |
pv Limit and Frictional Surface Behavior of Bronze Powder Filled Polyacetal/Polyethylene(LDPE, HDPE, HMWHDPE) Blends |
|
Hiromasa TAKAHASHI and Atsushi SAITO |
419 |
Effect of Plating Conditions on Residual Stress and Microstrain of Pulse-Plated Crack-Free Cr Layer |
|
Yuichi KOBAYASHI, Jun-ichi NAGASAWA, Kazuo WATANABE, Kiichi NAKAMURA, Toshihiko SASAKI and Yukio HIROSE |
427 |
