HRTEM Characterization of Atomic Structures in Cu/ƒ¿-Al2O3(0001) Interface |
 |
Takeo Sasaki, Katsuyuki Matsunaga, Hiromichi Ohta, Hideo Hosono, Takahisa Yamamoto and Yuichi Ikuhara |
555 |
Effect of Ag-Deposition on TiO2 on Photocatalytic Decomposition of Sulfide Chemicals |
|
|
560 |
Cd Removal of Hydroxyapatite and Its Application to Magnetic Separation |
|
Atsushi NAKAHIRA, Chikako KARATANI, Shinji KONISHI, Fumihide NISHIMURA, Shinichi TAKEDA, Shigehiro NISHIJIMA and Tsuneo WATANABE |
566 |
Consolidation Mechanism of Calcium Silicate on Exposure to Carbon Dioxide |
|
Yuko TAKADA, Haruhisa SHIOMI, Toshiyuki ISSHIKI, Takeshi SHIONO, Makoto KITAMURA, Takashi OOSUGI and Masatake KAMITANI |
571 |
Preparation of SiC Ceramics from Charcoal |
|
Yutaka MATSUMURA, Ikuko KAMADA, Takeshi SHIONO and Toshihiko NISHIDA |
576 |
Preparation of Ultra-High Molecular Weight Polyethylene/Titanium Oxide Composites for Bone Repairing Materials |
|
Hiroaki TAKADAMA, Masami HASHIMOTO, Yorinobu TAKIGAWA, Kaori JONO, Mineo MIZUNO, Yoshiyuki YASUTOMI, Tadashi KOKUBO and Noboru MIYATA |
581 |
Mechanical and Electrical Properties of Porous Lanthanum Strontium Manganite at Operating Temperature |
|
Tadahiro Nishikawa, Daiki Ogawa, Sawao Honda and Hideo Awaji |
587 |
Surface Features of Submicron-Sized Diamond -Effects of Adsorbed Oxygen- |
|
Hiroshi YAMANAKA and Satoru HOSOMI |
592 |
Evaluation of Crystal Growth Rate by Isothermal DTA |
|
Takashi WAKASUGI, Takuya KADOGUCHI, Katsuhisa TANAKA and Rikuo OTA |
596 |
Structural Control of Porous Fly-Ash and Flexural Strength by Zeolitization |
|
Toshinari KORI, Tatsuo BESSHI and Teisuke SATO |
601 |
Structural Analysis of Thick-Walled Filament-Wound Pipes |
|
Toshiaki NATSUKI, Hiroshi TSUDA and Kiyoshi KEMMOCHI |
606 |
Buckling Analysis of Symmetrically Laminated Composite Plates Using Higher-Order Shear Deformation Theory under Various Loading Conditions |
|
Qing-Qing NI, Jia XIE and Zen'ichiro MAEKAWA |
612 |
Effect of Various Joint Conditions on Maximum Loads and Yield Loads |
|
Yutaka NISHIUCHI, Yasushi KANAGAWA, Shinji FUJIWARA and Junfichi GOTOU |
619 |
Observations of Fatigue Slip-Band Growth and Crack Initiation in ƒ¿-Brass under Cyclic Shear Stresses by Means of Atomic-Force Microscopy |
|
Yoshikazu NAKAI and Kosuke MAEDA |
625 |
A Proposal on Creep Damage Analysis of Welded Joint of Low-Alloy Steel Considering Microscopic Damage Progress |
|
Fumiko KAWASHIMA, Takumi TOKIYOSHI, Toshihide IGARI, Akira SHIIBASHI and Naoya TADA |
631 |
Effect of Delamination Damage on High Temperature Fatigue Fracture Strength of Ceramics Thermal-Barrier-Coated Type 304 Stainless Steel |
|
Hiroyuki WAKI, Keiji OGURA, Izuru NISHIKAWA and Hirotaka NAGANUMA |
639 |
Internal Fracture with Fish-Eye and Effect of Surface Improvement by Dynamic Strain Aging on High Temperature Fatigue of a Low Alloy Steel |
|
Kenji KANAZAWA, Takayuki NISHIMURA, Kazuhiko MATSUDA, Kazuhiro KAGEYAMA and Koji YAMAGUCHI |
646 |
Analysis of Hydrogen Behavior in Fatigue Crack Growth of Lamellar TiAl by Means of Hydrogen Microprint Technique |
|
Masakazu YOSHIOKA, Akira UENO and Hidehiro KISHIMOTO |
653 |
Analysis of Hydrogen Behavior in Sustained-Load Crack Growth of Lamellar TiAl by Means of Hydrogen Microprint Technique |
|
Masakazu YOSHIOKA, Akira UENO and Hidehiro KISHIMOTO |
660 |
Crack-Healing Behavior of Monolithic Alumina and Strength of Crack-Healed Member |
|
Byung-Soo KIM, Kotoji ANDO, Min-Cheol CHU and Shinji SAITO |
667 |
Strength Properties of Crack-Healed Silicon-Carbide Ceramics |
|
Sangkee LEE, Wataru ISHIDA and Kotoji ANDO |
674 |
Fabrication and High-Temperature Flexural Strength of a Sintered SiC Fiber Reinforced SiC Composite |
|
Michiyuki SUZUKI, Yoshiyuki INOUE, Mitsuhiko SATO, Toshihiro ISHIKAWA and Koichi GODA |
681 |
Internal Strain Monitoring by Optical Fiber Sensor and Cure Shrinkage During Curing of CFRP |
|
|
688 |
Size and Depth Detection for Internal Defects Using A.C.Potential Drop Method |
|
Yeonkyeong LEE and Masao SAKANE |
695 |
Friction and Wear Properties of Solution-Treated and Aging-Treated Mg-Al-Zn Alloys |
|
Ryo YOSHIOKA, Takashi MATSUOKA, Kazuhiko SAKAGUCHI Toshiji MUKAI and Akihiro MURATA |
702 |
