X-Ray Stress Measurements of Chamaecyparis Obtusa Wood under Repeated Uniaxial Tensile Stress in the Fiber Direction |
 |
Takahisa NAKAI, Hiroyuki YAMAMOTO, Masatoshi HAMATAKE and Tetsuya NAKAO |
358 |
Reduction of Surface Checks by the High-Temperature Setting Method on Kiln Drying of Sugi Boxed-Heart Timber without Back-Splitting |
|
Takahisa YOSHIDACTakeo HASHIZUME, Takashi TAKEDA, Morihiko TOKUMOTO and Akira INDE |
364 |
Distributions of Drying Set in Sugi and Hinoki Boxed-Heart Square Timbers Dried by the High-Temperature Setting Method |
|
Morihiko TOKUMOTO, Kenichi HOKARI, Takashi TAKEDA, Koh YASUE and Takahisa YOSHIDA |
370 |
Machinability of the Smoke-Heat Treated Sugi |
|
Chiaki TANAKA, Shigeo NAKAYAMA, Atsushi KABE, Shizuyoshi AOYAMA, Lao XUEQUN, and Tadashi OHTANI |
376 |
Evaluation of Fire Retardancy of Wood-Mineral Composed Veneers Made with Sugi and Konara Using the Colloidal Silica-Boric Acid System |
|
Takashi GOTO and Takeshi FURUNO |
381 |
Componental Analysis of Inorganic Substances in Wood-Mineral Composites Prepared Using Various Silicate Solution System |
|
Takeshi FURUNO, Masayuki KATSUBE and Sadanobu KATOH |
388 |
Poisson's Ratio of Wood-Based Panels and Poisson's Effect of Hygroscopic Linear Expansion under a Uniaxially Dimensional Restraint |
|
Noboru SEKINO and Taeko SASAKI |
396 |
Effect of Mismatch of Stacking Phase on Damage Development of Plain Woven Fabric Composite Materials |
|
Yasutomo UETSUJI, Yoshiaki ISHIWARI, Masaru ZAKO, Tetsusei KURASHIKI and Ignaas VERPOEST |
403 |
Micromechanical Stress Field for Clustered Multiple Fibers in Unidirectional Composite under Longitudinal Shear |
|
Fumitaka KOBAYASHI, Shiro BIWA and Nobutada OHNO |
410 |
A Microstructure Change and a Fracture Characteristic of Apatite Ceramics by an Organism Activity Function |
|
Noriyuki HISAMORI Yuu NOJIRI and Kenichi TAKAI |
417 |
Influence of Creep and Fatigue Pre-damage on Creep-Crack- and Fatigue-Crack-Growth Rates of CrMoV Rotor Steel |
|
Masaru SEKIHARA and Shigeo SAKURAI |
424 |
Influence of Accumulative Passing Tonnage on Fatigue Crack Growth Behavior in Rail Steel |
|
Nobushige KOISO, Yukio SATO, Sayuri MATSUOKA and Kenji KASHIWAYA |
432 |
Fresh Properties and the Development of Strength in High Volume Coal Ash Shotcretes |
|
Shin-ichi IGARASHI, Yuuichi AKITA, Ken-ichi MATSUI and Atsumu ISHIDA |
437 |
Internal Friction and Dynamic Modulus in Metaphosphate Glasses |
|
Masahiro Sakamura, Masakuni Ozawa and Suguru Suzuki |
444 |
Slaking Characteristic of Tertiary Shale and Tunneling in Nanki Region |
|
Chikaosa TANIMOTO, Toshihiko AOKI, Yuki TAJIMA, Shuichi IWATA, Tadashi MASUYA and Kimikazu TSUSAKA |
447 |
Biodegradation Behavior of Unidirectional Fiber-Reinforced "Green" Composites |
|
Shinji OCHI and Hitoshi TAKAGI |
454 |
Proposal of Delamination Strengh Evaluation Method of Thermal Barrier Coatings Based on Interface Cohesive Model with Interface Oxidation Process |
|
Masayuki ARAI |
459 |
