Trend of Superplasticizers for Ultra-Hith-Strength Concrete from 100 to 150N/?
Takumi SUGAMATA and Akira OHTA
Vol. 54 No. 8 CONTENTS
Special Issue on Structural Materials
General Paper
Special Issue on Structural Materials (Vol.54 No.8)
Foreword | |
T.Miyagawa |
793 |
Review paper (Vol.54 No.8)
Trend of Superplasticizers for Ultra-Hith-Strength Concrete from 100 to 150N/? |
|
Takumi SUGAMATA and Akira OHTA |
794 |
Original Paper (Vol.54 No.8)
Effects of Accelerated Curing Conditions on Strength Properties of Polymer-Modified Mortars with SBR Latex and Hardener-Free Epoxy Resin |
 |
Yoshihiko OHAMA, Shinobu Takahashi and Masahiro OTA |
804 |
Effect of Dosage of Pigment on the Surface Color of Concrete |
|
Takashi FUJII, Akihiro FUJIKI, Hidekazu TANAKA and Toshiki AYANO |
810 |
Experimental Investigation on Alteration of the Characteristics of Bentonite Sand Mixtures at the Interface with Concrete by Electrical Migration Method |
|
Takafumi SUGIYAMA , Kosei FUKUOKA@and Yukikazu TSUJI |
816 |
Mix Design of Concrete with Air-Entraining and High Range Water-Reducing Admixture Containing Stabilized Sludge Water |
|
Junji NAKAMOTO, Kazuo TOGAWA, Yoshitaka MITSUIWA and Toshiyuki TANI |
822 |
Properties of Concrete Using Copper Slag and Second Class Fly Ash as a Part of Fine Aggregate |
|
Keisuke ISHIMARU, Hiroyuki MIZUGUCHI, Chikanori HASHIMOTO, Takao UEDA, Kazuhiro FUJITA and Masaaki OHMI |
828 |
Penetration of the Chloride Ion to the High-Strength Concrete Mixed with Ground Granulated Blast Furnace Slag -Measurement of a Distribution of the Chloride Ion Concentration by EPMA- |
|
Hiromichi MATSUSHITA, Yoshitaka MAEDA, Kazumasa FUJITA and Kenji IWAI |
834 |
Properties of Concrete after 30 yearsf Exposure under Marine Submerged Condition |
|
Hidenori HAMADA, Tarek Uddin Mohammed, Toru YAMAJI |
842 |
Application of AE Rate Process Analysis to Estimate of Damaged Concrete |
|
Genki KOMENO,Tetsuya SUZUKI,Yukifumi IKEDA and Masayasu OHTSU |
850 |
A Study on Crack Prevention at Service State of Reinforced Concrete Member Fortified Tension Zone by Reactive Powder Composite |
|
Isao UJIKE, Kazunori KATO, Yoshimitsu KONISHI and Masato NUMATA |
855 |
Effect of Bending Work of Main Bar to Correct Displacement of Bar Position on Mechanical Behavior of Reinforced Concrete Member |
|
Masanori TSUJI, Yuji ISHIKAWA, Tsuyoshi HATANAKA, Takehiro SAWAMOTO, Ryota IIDA, Masaru OKAMOTO |
861 |
Original Paper (Vol.54 No.8)
Fatigue Strength of High Strength Steel Welded Joint after Large Strain Cycling |
|
Kazuhiko OKUYA and Yoshiyuki KONDO |
869 |
Fatigue Strength of Poly-p-Phenylene Benzobisoxazole(PBO) Fibers |
|
Noriyo HORIKAWA, Yoshio HARUYAMA, Akiyoshi SAKAIDA, Muneki UEDA |
875 |
X-Ray Stress Measurement of Textured TiCN Films Using Crystallite Orientation Distribution Function |
|
Shouichi EJIRI, Masahide GOTOH, Toshihiko SASAKI and Yukio HIROSE |
881 |
Cross-Sectional Area Measurement and Monofilament Strength Test of Kenaf Bast Fibers |
|
Kohji SUZUKI, Isao KIMPARA, Hiroshi SAITO and Kunio FUNAMI |
887 |
Lecture (Vol.54 No.8)
Stress Evaluation by Diffraction using Neutron and Synchrotron RadiationW:Application of Stress Measurement using Neutron Diffraction to Industrial Components |
|
Shinobu OHKIDO and Atsushi MORIAI |
895 |
