Contents57-9

Vol. 57 No. 9 CONTENTS
Special Issue on Biomedical Materials
General Paper

Special Issue on Biomedical Materials (Vol.57 No.9)

Review paper (Vol.57 No.9)

Creation of Titanium - Segmented Polyurethane Composite through Silane Coupling Agent

Harumi TSUTSUMI, Yohei HIROHASHI, Kazuhiko NODA, Mitsuo NIINOMI, and Takao HANAWA
859

Original Paper (Vol.57 No.9)

Evaluation of Mechanical and Biodegradable Properties on Composite Scaffolds Composed of Three-Dimensional Fabric Structure

Chiaki HIWA, Kumiko YOKOTA, Yoshikazu NAKAI, Nobuo TANAKA, Toshiyuki IMOTO, Taiji ADACHI, Masaki HOJO and Shunsuke BABA
868

Influence of Environmental Degradation and Vitamin-E (α-Tocopherol) Addition on the Fatigue Crack Growth Property of Ultra High Molecular Weight Polyethylene

Kazuto TANAKA，Akimasa KAMIMURA，Tsutao KATAYAMA，Sadamu KINOSHITA，Hideyuki SAKODA and Koichi KURAMOTO
875

Effect of Low-Gamma Irradiation on the Impact Compressive Properties of Ultra High Molecular Weight Polyethylene and Its Constitutive Model

Koichi KOBAYASHI, Makoto SAKAMOTO and Yuji TANABE
882

ELID(Electrolytic In-Process Dressing) Grinding for Surface Modification of Titanium Alloy and Its Effects

Masayoshi MIZUTANI Souichi YAMAMOTO Jun KOMOTORI Kazutoshi KATAHIRA and Hitoshi OHMORI
887

Change in Fatigue Strength of Biomedical β-Type Titanium Alloy thorough Heat Treatment Processes

Toshikazu AKAHORI Mitsuo NIINOMI Masaaki NAKAI and Michiharu OGAWA
893

Biocompatibility Evaluation of Piezoelectric Materials through Cytotoxicity Test

Yasutomo UETSUJI, Takahiro UEDA, Hwishim HWANG,Yoshiaki HIRANO, Kazuyoshi TSUCHIIYA and Eiji NAKAMACHI
899

General Paper (Vol.57 No.9)

Original Paper (Vol.57 No.9)

Effect of Tempering Temperature on Very High Cycle Fatigue Behavior in Low-Alloy Steel, SNCM439

Kazuaki SHIOZAWA, Nobuhiro SHIBATA and Yasuhiro MARUYAMA
905

Effects of Mold Media and Porosity on Ductile Fracture Properties of Cast Aluminum Alloy A356

Hiroyuki MAE, Xiaoqing TENG, Yuanli BAI and Tomasz WIERZBICKI
913

Hall-Petch Relation and Twin Boundaries in Pure Copper and Cu-Al Alloys

Sei MIURA, Nagato ONO and Yoshito NISHIMURA
921

Improvements in Thermal Stability of Cobalt-Silicide Films by Adding Nickel

Hiromi SHIMAZU, Tomio IWASAKI, Hiroyuki OHTA and Hideo MIURA
929

Asymptotic Analysis of Mode Ⅱ Singular Fields near a Crack Tip in a Hardening Drucker-Prager Elastic-Plastic Material

Taiki SHIMBO and Chikayoshi YATOMI
936

An Expedient Evaluation Method for Warp Deformation Behavior of Laminated Beam Consisting of Viscoelastic Materials in Cooling Process

Shozo NAKAMURA and Takuya KAWABATA
944

Effect of Total Rubber Content on Ductility of Polypropylene Blended with Bimodal Distribution of Styrene-Ethylene-Butadiene-Styrene Particle Size

Hiroyuki MAE, Masaki OMIYA and Kikuo KISHIMOTO
951

Lecture (Vol.57 No.9)

Development in Composites Technology for Reduction of Environmental Load Ⅳ:The Approaches with SiC/SiC Composites for a High-Performance Gas Generator

Mitsuhiko SATO, Hirotoshi NAKAYAMA, Takahiro SEKIKAWA, Kenichiro IGASHIRA and Takeshi NAKAMURA
959

Creation of Titanium - Segmented Polyurethane Composite through Silane Coupling Agent
Harumi TSUTSUMI, Yohei HIROHASHI, Kazuhiko NODA, Mitsuo NIINOMI, and Takao HANAWA	859

Evaluation of Mechanical and Biodegradable Properties on Composite Scaffolds Composed of Three-Dimensional Fabric Structure
Chiaki HIWA, Kumiko YOKOTA, Yoshikazu NAKAI, Nobuo TANAKA, Toshiyuki IMOTO, Taiji ADACHI, Masaki HOJO and Shunsuke BABA	868
Influence of Environmental Degradation and Vitamin-E (α-Tocopherol) Addition on the Fatigue Crack Growth Property of Ultra High Molecular Weight Polyethylene
Kazuto TANAKA，Akimasa KAMIMURA，Tsutao KATAYAMA，Sadamu KINOSHITA，Hideyuki SAKODA and Koichi KURAMOTO	875
Effect of Low-Gamma Irradiation on the Impact Compressive Properties of Ultra High Molecular Weight Polyethylene and Its Constitutive Model
Koichi KOBAYASHI, Makoto SAKAMOTO and Yuji TANABE	882
ELID(Electrolytic In-Process Dressing) Grinding for Surface Modification of Titanium Alloy and Its Effects
Masayoshi MIZUTANI Souichi YAMAMOTO Jun KOMOTORI Kazutoshi KATAHIRA and Hitoshi OHMORI	887
Change in Fatigue Strength of Biomedical β-Type Titanium Alloy thorough Heat Treatment Processes
Toshikazu AKAHORI Mitsuo NIINOMI Masaaki NAKAI and Michiharu OGAWA	893
Biocompatibility Evaluation of Piezoelectric Materials through Cytotoxicity Test
Yasutomo UETSUJI, Takahiro UEDA, Hwishim HWANG,Yoshiaki HIRANO, Kazuyoshi TSUCHIIYA and Eiji NAKAMACHI	899

Effect of Tempering Temperature on Very High Cycle Fatigue Behavior in Low-Alloy Steel, SNCM439
Kazuaki SHIOZAWA, Nobuhiro SHIBATA and Yasuhiro MARUYAMA	905
Effects of Mold Media and Porosity on Ductile Fracture Properties of Cast Aluminum Alloy A356
Hiroyuki MAE, Xiaoqing TENG, Yuanli BAI and Tomasz WIERZBICKI	913
Hall-Petch Relation and Twin Boundaries in Pure Copper and Cu-Al Alloys
Sei MIURA, Nagato ONO and Yoshito NISHIMURA	921
Improvements in Thermal Stability of Cobalt-Silicide Films by Adding Nickel
Hiromi SHIMAZU, Tomio IWASAKI, Hiroyuki OHTA and Hideo MIURA	929
Asymptotic Analysis of Mode Ⅱ Singular Fields near a Crack Tip in a Hardening Drucker-Prager Elastic-Plastic Material
Taiki SHIMBO and Chikayoshi YATOMI	936
An Expedient Evaluation Method for Warp Deformation Behavior of Laminated Beam Consisting of Viscoelastic Materials in Cooling Process
Shozo NAKAMURA and Takuya KAWABATA	944
Effect of Total Rubber Content on Ductility of Polypropylene Blended with Bimodal Distribution of Styrene-Ethylene-Butadiene-Styrene Particle Size
Hiroyuki MAE, Masaki OMIYA and Kikuo KISHIMOTO	951

Development in Composites Technology for Reduction of Environmental Load Ⅳ:The Approaches with SiC/SiC Composites for a High-Performance Gas Generator
Mitsuhiko SATO, Hirotoshi NAKAYAMA, Takahiro SEKIKAWA, Kenichiro IGASHIRA and Takeshi NAKAMURA	959