Technical Note (Vol.60 No.3)

Improvement of Catalytic Activity of LaSrCoO4 by Micronization
Xiaomao YANG and Masakuni OZAWA	191

Original Paper (Vol.60 No.3)

Influence of Ceria Doping on Oxygen Relaxation and Oxide Ion Conduction in Yttria Stabilized Cubic Zirconia
Masakuni OZAWA and Kensuke IMURA	194
Anelastic Behavior of Hydroxyapatite Ceramic
Masakuni OZAWA, Masayuki ICHIYANAGI and Suguru SUZIKI	198
Refurbishment of Creep Damage Using Re-Heat Process for Ni-Based Superalloy under Bending Load
Masaru SEKIHARA, Kunihiro ICHIKAWA, Shinya IMANO, Yukio KAGIYA, Akihiro ITO and Kouji CHUUJOU	202
Effect of Pre-Strain History on Small Crack Growth under Low Cycle Fatigue for JIS SFVQ1A Steel
Shota HASUNUMA, Yohei MIYATA, Kenichi SAKAUE and Takeshi OGAWA	210
Strength of Torsional Pre-Strained Specimen of Aluminum and Observation of Fatigue Fractured Surface
Kazuo KUNIYOSHI, Daisaku SHINOHARA, Chobin MAKABE, Masaki FUJIKAWA and Ryouji KONDOU	217
Parameters Evaluation of Three-Element Solid Model for Viscoelastic Materials by Indentation Test
Mitsuhiro TANI, Atsushi SAKUMA, Makoto OGASAWARA and Takashi SAITO	224
Method of Determination of Young's Modulus Anisotropy of Brittle Material Known the Direction of Anisotropy with Diametrical Compression Test
Takashi TSUTSUMI	229
UV Irradiation Degradation Control of Sand Stabilized with Containing Organic Slurry Hydrophilic Polyurethane
Zhiren WU, Zhishen WU, Kentaro IWASHITA, Weiming GAO and Hiroto INAGAKI	235
Experimental Study for Swelling Ratio and Pressure of Water Swelling Material as an Impermeable Material
Shinya INAZUMI, Makoto KIMURA, Tadashi WAKATSUKI and Masakatsu KOBAYASHI	240
Damage Condition of GFRP Tank Used for Long Period in Alkaline Environment
Tatsuro MORITA, Ryota TAKENAKA, Shinta MABUCHI, Yoshimichi FUJII and Masanori OKANO	245
Vacuum Assisted High Speed Compression Molding and Evaluation of Mechanical Properties of Continuous Carbon Fiber Reinforced Polycarbonate Composite
Kazuto TANAKA, Hitoshi KASHIHARA and Tsutao KATAYAMA	251
Wetting Characteristics of Different Types of Liquid on Particulate Composite Materials
Kentaro YAMAUCHI, Goro YAMAUCHI and Kenichi TAKAI	259

Lecture (Vol.60 No.3)

The Front Line of Impact Engineering ‡T:Round Robin Test Results of High Strain Rate Tensile Test Machines and an Advanced Application to Study of High Strain Rate Deformation Behavior of Materials
Shusaku TAKAGI	265