Contents47-10

Vol. 47 No. 10 CONTENTS
Special Issue on High Pressure
General Paper

Special Issue on High Pressure (Vol.47 No.10)

Foreword
Hironobu Kubota	989

Original Paper (Vol.47 No.10)

HIP sintering of Si mixed diamond powder

Masaru Shimono; Katsuo Kazehaya; Shoichi Kume
990

Synthesis of highly dense Ti₃SiC₂ by HIP and its characterization

Ning Feng Gao; Yoshinari Miyamoto; Kimiaki Tanihata
994

High pressure sintering of B₆O powder and properties of sintered compact

Hideaki Itoh; Ichiro Maekawa; Hiroyasu Iwahara
1000

Discussion of fcc/bcc phase transformation under uniaxial strain by electron stress

Shigeo Kotake; Hiroyuki Kimata; Takashi Aoki; Yasuyuki Suzuki; Masafumi Senoo
1006

High pressure elastic properties of simple molecular solids studied by Brillouin scattering

Hiroyasu Shimizu; Tetsuji Kume; Shigeo Sasaki
1012

Measurement of pressure distribution in pressure media under very high pressure in a diamond anvil cell and estimation of their friction factor

Takeru Nakashima; Shuichi Satoh; Yuichi Nakamura; Yasushi Kurosaki
1019

Experimental techniques to prevent impurity contamination and to measure fusion temperature of aluminum alloys at high pressure

Iwao Kondo; Masafumi Senoo; Yutaka Takahashi; Shigeo Kotake; Akihito Matsumuro
1025

General Paper (Vol.47 No.10)

Review paper (Vol.47 No.10)

Biological corrosion of concrete in sanitary sewerage systems and treatment plants

Isao Kinishita
1031

Technical Topics (Vol.47 No.10)

Photochemical reaction and structure of chalcogenide glasses containing a large amount of Ag
- Photoinduced surface deposition of metallic fine Ag particles -

Taleshi Kawaguchi
1041

Original Paper (Vol.47 No.10)

Non uniform deformation of Fe-3%Si single crystals

Moritaka Hida; Xiaoping Jiang; Yoshito Takemoto; Kazuaki Yamamoto
1046

Influence of strain rate on grain size dependence of strength of sheet steel

Kazuya Miura; Shusaku Takagi; Osamu Furukimi; Shinji Tanimura
1053

E integral analysis of a crack with parallel interacting cracks

Takahiro Abe; Chikayoshi Yatomi; Ken ichi Hashimoto
1059

Fretting fatigue strength properties of pearlitic and bainitic steels with medium carbon steel contact material

Yasuo Ochi; Bungo Tateno; Toshiya Kuroki
1065

Statistical properties on mechanical strength of glass for cathode ray tubes

Shigeo Ohsugi; Sumio Yoshioka; Masayuki Miyazaki; Junko Itoh; Shuichi Tani; Koji Nakamura; Akemi Hijikata
1071

Viscosity of aqueous lithium chloride solution under high pressure

Takehiro Nakai; Yoshiaki Tomoda; Seiji Sawamura; Yoshihiro Taniguchi
1077

Stress transfer in high performance polyethylene fiber reinforced epoxy resin composite analyzed by X-ray diffraction
- In the direction parallel to the fiber axis -

Takashi Nishino; Kei Nakamura; Katsuhiko Nakamae
1083

Lecture (Vol.47 No.10)

Current fractographic research and its application
V:The fractographic technique for failure analysis
- FRASTA and quantitative evaluation of applied stress by surface roughness -

Masaharu Fujihara; Takahiro Hattori
1088

HIP sintering of Si mixed diamond powder
Masaru Shimono; Katsuo Kazehaya; Shoichi Kume	990
Synthesis of highly dense Ti₃SiC₂ by HIP and its characterization
Ning Feng Gao; Yoshinari Miyamoto; Kimiaki Tanihata	994
High pressure sintering of B₆O powder and properties of sintered compact
Hideaki Itoh; Ichiro Maekawa; Hiroyasu Iwahara	1000
Discussion of fcc/bcc phase transformation under uniaxial strain by electron stress
Shigeo Kotake; Hiroyuki Kimata; Takashi Aoki; Yasuyuki Suzuki; Masafumi Senoo	1006
High pressure elastic properties of simple molecular solids studied by Brillouin scattering
Hiroyasu Shimizu; Tetsuji Kume; Shigeo Sasaki	1012
Measurement of pressure distribution in pressure media under very high pressure in a diamond anvil cell and estimation of their friction factor
Takeru Nakashima; Shuichi Satoh; Yuichi Nakamura; Yasushi Kurosaki	1019
Experimental techniques to prevent impurity contamination and to measure fusion temperature of aluminum alloys at high pressure
Iwao Kondo; Masafumi Senoo; Yutaka Takahashi; Shigeo Kotake; Akihito Matsumuro	1025

Biological corrosion of concrete in sanitary sewerage systems and treatment plants
Isao Kinishita	1031

Photochemical reaction and structure of chalcogenide glasses containing a large amount of Ag - Photoinduced surface deposition of metallic fine Ag particles -
Taleshi Kawaguchi	1041

Non uniform deformation of Fe-3%Si single crystals
Moritaka Hida; Xiaoping Jiang; Yoshito Takemoto; Kazuaki Yamamoto	1046
Influence of strain rate on grain size dependence of strength of sheet steel
Kazuya Miura; Shusaku Takagi; Osamu Furukimi; Shinji Tanimura	1053
E integral analysis of a crack with parallel interacting cracks
Takahiro Abe; Chikayoshi Yatomi; Ken ichi Hashimoto	1059
Fretting fatigue strength properties of pearlitic and bainitic steels with medium carbon steel contact material
Yasuo Ochi; Bungo Tateno; Toshiya Kuroki	1065
Statistical properties on mechanical strength of glass for cathode ray tubes
Shigeo Ohsugi; Sumio Yoshioka; Masayuki Miyazaki; Junko Itoh; Shuichi Tani; Koji Nakamura; Akemi Hijikata	1071
Viscosity of aqueous lithium chloride solution under high pressure
Takehiro Nakai; Yoshiaki Tomoda; Seiji Sawamura; Yoshihiro Taniguchi	1077
Stress transfer in high performance polyethylene fiber reinforced epoxy resin composite analyzed by X-ray diffraction - In the direction parallel to the fiber axis -
Takashi Nishino; Kei Nakamura; Katsuhiko Nakamae	1083

Current fractographic research and its application V:The fractographic technique for failure analysis - FRASTA and quantitative evaluation of applied stress by surface roughness -
Masaharu Fujihara; Takahiro Hattori	1088