X-Ray Study of Lattice Strain in Piezoelectric Ceramics(PZT) |
 |
Keisuke Tanaka; Yoshiaki Akiniwa; J.Yu; Yoshihisa Sakaida; Hiromi Mukai |
678 |
X-Ray Fractographic Study on Fe-Cr Steel/TiN System Sintered Composites |
|
Shigeki Takago; Toshihiko Sasaki; Masaharu Miyano; Yukio Hirose; |
686 |
Macro and Micro Residual Stresses in Ground Layer of (ƒ¿{ƒÁ)@Dual Phase Stainless Steel |
|
Hajime Hirose; Toshihiko Sasaki |
692 |
X-Ray Residual Stress Measurement of TiN Film Deposited by Arc@Ion Plating Method |
|
Tatsuya .Matsue; Takao Hanabusa; Yasytazu Ikeuchi, Yasuhiro Miki; Eiji Maitani |
699 |
X-Ray Stress Analysis for Polycrystalline Materials with Preforred Orientation |
|
Shouichi Ejiri; Toshihiko Sasaki; Masaharu Miyano; Yukio Hirose |
705 |
In-Site Measurement for Actual Stress Distribution by Using X-Ray Diffraction during Rotary Bending Fatigue Test |
|
Sin-ichi Ohya; Toshitaka Nagahama; Reiko Kojima; Yoshihiko Hagiwara |
711 |
Influence of Specimen Missetting to the X-Ray Stress Measurement in the Case of Side Inclination Method Using Position Sensitive Proportional Counter as Detector |
|
Toru Goto |
717 |
Influence of Transformation Plasticity on the Distortion of Carburized Quenching Process of Cr-Mo Steel Ring |
|
Shigeru Yamanaka; Takayuki Sakanoue; Toshikazu Yoshii; Tatsuo Inoue |
733 |
Sintering Behavior of Zirconia Thermal Barrier Coating under Gradient Temperature |
|
Yoshiyasu Itoh; Tsuneji Kameda; Takanari Okamura; Kohsoku Nagata |
740 |
Corrosion Resistance Evaluation of Brittle Materials in Boiling Sulfuric Acid |
|
Naoki Nishiyama; Masatoshi Futakawa; kuo Ioka; Kaoru Onuk; Saburo Shimizu; Motokuni Eto; Tatuo Oku; Makoto Kurabe |
746 |
Effect@of Fretting on Fatigue Strength of Mechanically Fastened GFRP Joint |
|
Yoshiki Gotoh |
753 |
Crack Initiation Strength of Notch in Sintered Tungsten Alloys |
|
Satoshi Kobayashi; Yoshiharu Mutoh; Yasunobu Hosokai |
758 |
Analysis of Infinite Plate under Out-of-Plane Load on the Edge of Crack and Comparison by FEM Analysis |
|
Yasuhidae Abe; Yasuhiko Murase; Kouju Fujii; Kenji Nakagawa |
763 |
Evaluation of Axisymmetrical Elastic Field and Stress Intensity Factor for a Nonhomogeneous Half-Space Containing a Penny-Shaped Crack |
|
Sang-Pyo Jeon; Yoshinobu Tanigawa |
771 |
Corrosion Resistance of Tantalum-Oxide Films Deposited by PLD |
|
Takanori Hino; Minoru Nishida; Takao Araki; Toshihiko Ooie; Tetsuo Yano; Masafumi Yoneda; Munehide Katsumura |
777 |
Properties of One-Component Latent Curing Epoxy-Modified Mortars |
|
Haruka Ogawa |
783 |
Detection of the Debonding in Al-Pultureded GFRP Adhesively Bonded Joints with Optical Fibers |
|
Katsuhiko Osaka; Takehito Fukuda; Katsuhiko Sakamoto; Mitsuo Kobayashi |
789 |
